This is an old revision of the document!
Table of Contents
Overview
Owner = Vancouver Hack Space
User certification required = YES (see below)
Hackable = NO
Arrived = March 30, 2012
Doesitwork = WORKING - Setup and testing in progress
If it breaks = Turn off main power, leave water cooler running for 5 minutes and then shut off the Master Power and unplug. Put a BROKEN sign on machine. Notify Members list and Laser Cutter Committee immediately.
Contact = Richard Sim or any Laser Cutter Committee member
Where = Laser Room
Value = $3500 + ~$1000 to get it here and set up
Work area size = 1000mm x 800mm
Laser Cutter User Certification
Anyone who wishes to use the laser cutter must be both a VHS member, and have completed a laser cutter training class (class dates are announced on the members' mailing list)
If you are planning to take a class, please first read through the operation manual. http://vancouver.hackspace.ca/doku.php?id=laser_cutter_operation_manual