This is an old revision of the document!

Norseman Drill Bits

Model / Serial	Norseman Black and Gold
Status	Operational as of April 2019
Training	Optional
Hackable	NO
Usage Restrictions	Members Only, Keyholders Only, Whitelist)
Owner	John Craver
If it Breaks	Go to Summit Tools in Burnaby and buy a replacement bit, or contact John
Loan Status	Owned
Arrival Date	June 2010
Location	Black Metal Case stuck with magnets to the Drill Press' column
Value	$75
Champion	See Compendium of Champions

owner = John Craver (VHS members are welcome to use these drill bits whenever they want to)
user certification required = Must be able to use a drilling machine well.
hackable = No (See tips below)
model = Norseman Black and Gold
serial # =
arrived = June 2010
does it work? = Works
if it breaks = Go to Summit Tools in Burnaby and buy a replacement bit, or contact John.
contact = John Craver
where = Black Metal Case stuck with magnets to the Drill Press' column.
value = $75

What's So special about these drill bits anyway?

These are very high quality twist drill bits that are designed primarily for drilling through hard metals (such as stainless steel). They are extremely sharp; sharper than average drill bits, so be very careful. Clamping your workpiece is especially important when using these bits, as they can “bite” into the material and snag much easier than average drill bits do.

If you break a bit, please obtain an exact replacement from Summit Tools or any other local dealer of Norseman drill bits(prices range from $2-$10 depending on the size of the bit), or contact John for details.