tool:form1sla
This is an old revision of the document!
Form 1 SLA Resin 3D Printer
Status | Work in Progess |
---|---|
Training | Mandatory |
Hackable | Hardware: No / Software: maybe, see below |
Usage Restrictions | Members Only |
Owner | VHS |
If it Breaks | Put a “broken” sign on machine, post to Talk with details. |
Loan Status | Generously donated to VHS |
Arrival Date | Aug 2018 |
Location | Workbench (designated SLA printing station) |
Champion | See Compendium of Champions |
Information:
General info
Recommended reading / watching
=OpenFL= See GitHub for OpenFL
Set Up a Print
Cleaning Up
=how to clean the tank= Semi official instruction from FormLabs staff
1. Use the scraper to scrape out as much resin as possible. 2. Use the squirt bottle to squirt IPA into the tank while holding the tank upside down so the IPA can drip out. You don’t want the liquid pooling in the resin tank as it could seep under the silicone, destroying the tank. You can use the scraper to wipe the silicone. 3. Place the resin tank upside down on a paper towel to let the IPA drip out and dry.
Clean Up After a Successful Print
Clean Up After a Failed Print
tool/form1sla.1534916125.txt.gz · Last modified: 2018/08/22 05:35 by mimi_x