tool:powertig250ex
This is an old revision of the document!
Table of Contents
PowerTIG 250EX
| model | PowerTIG 250EX |
|---|---|
| Status | Operational |
| Usage Restrictions | Members with Training |
| Training | Mandatory |
| User certification required | YES |
| Hackable | NO |
| Owner | Metal Janet |
| If it Breaks | Let Janet know, put up an Out of Order sign |
| Loan Status | Semi-Permanent Loan |
| Arrival Date | September 2019 |
| Location | Rear Metal Area |
| Champion | Metal Janet |
Resources
Warning: Power must be limited!
We have to keep the machine current draw from the wall down below 14 amps to avoid popping a fuse. Yes I mean fuse, not a breaker. The fuse box is locked because you can get an arc flash when changing the fuse if you do it wrong. Popping the fuse will not hurt the machine, but it will prevent any further lasering, lathing, or welding from continuing until someone with experience can swap the fuse.
The machine is rated for 32 amp draw max, so don't exceed 40% of any of its max ratings:
- TIG: 250A x 40% = 100A
- Stick: 200A x 40% = 80A
tool/powertig250ex.1574023497.txt.gz · Last modified: 2019/11/17 20:44 by lukecyca