tool:3d-printers:anycubic_photon_mono
This is an old revision of the document!
Table of Contents
Name of Tool
Summary description of the tool and perhaps some notes about its existence!
| Make & Model | AnyCubic Photon Mono |
|---|---|
| User Manual | https://drive.google.com/file/d/13RRYWYLUbsuTgqAV4Z7Vqjsnr4SrinkZ/view |
| Training | Mandatory on any SLA printer |
| Hackable | No |
| Usage Restrictions | Anyone |
| Owner | Phillip Ma |
| If it Breaks | Report on Slack/Talk - please tag @phillip_m (slack) or @phillip_ma (talk) |
| Loan Status | Long Term Loan |
| Arrival Date | September 2023 |
| Location | Paint and Mess Room |
| Value | $$ |
| Champion | See Compendium of Champions |
Safety
Nitrile Gloves are Mandatory Respirator and turning on Ventalation highly recommended.
Specifications
2k printer
Approved Resins
Members are encouraged to bring their own resin for their printing. Resin left behind is fair game for anyone to use and can easily be mixed in with resins of a different brand affecting the print quality of subsequent prints.
| Brand | Layer Thickness | Normal Exposure | Bottom Exposure time | Bottom Layers |
|---|---|---|---|---|
| Elegoo Plant Based 3D Printer Resin | 0.05mm | 1.5s | 80s | 6 |
Tutorial
Contact @phillip_m or @avy on slack for training. A form is also pinned to the #3dprinting channel in slack but contact us directly if you want the run down.
Maintenance Log
| Note | Date | Who |
|---|---|---|
| Routine Test print | March 5th, 2024 | Phillip M |
tool/3d-printers/anycubic_photon_mono.1709707997.txt.gz · Last modified: 2024/03/06 06:53 by phillip_ma