tool:3d-printers:anycubic_photon_mono
This is an old revision of the document!
Table of Contents
Name of Tool
Summary description of the tool and perhaps some notes about its existence!
| Make & Model | AnyCubic Photon Mono |
|---|---|
| User Manual | https://drive.google.com/file/d/13RRYWYLUbsuTgqAV4Z7Vqjsnr4SrinkZ/view |
| Training | Mandatory on any SLA printer |
| Hackable | No |
| Usage Restrictions | Anyone |
| Owner | Phillip Ma |
| If it Breaks | Report on Slack/Talk - please tag @phillip_m (slack) or @phillip_ma (talk) |
| Loan Status | Long Term Loan |
| Arrival Date | September 2023 |
| Location | Paint and Mess Room |
| Value | $$ |
| Champion | See Compendium of Champions |
Safety
Nitrile Gloves are Mandatory Respirator and turning on Ventalation highly recommended.
Specifications
2k printer
Approved Resins
| Brand | Layer Thickness | Normal Exposure | Bottom Exposure time | Bottom Layers |
|---|---|---|---|---|
| Elegoo Plant Based 3D PRinter Resin | 0.05mm | 1.5s | 80s | 6 |
Tutorial
Contact @phillip_m or @avy on slack for training. A form is also pinned to the #3dprinting channel in slack but contact us directly if you want the run down.
Maintenance Log
Any maintenance, repairs, relocations, changes, etc to the tool should be logged below with a note, date and who!
| Note | Date | Who |
|---|---|---|
| Wiki entry created | Nov 20, 2013 | Thomas L. |
tool/3d-printers/anycubic_photon_mono.1709707618.txt.gz · Last modified: 2024/03/06 06:46 by phillip_ma