tool:taig_cnc_mill:taig_tools
This is an old revision of the document!
TAIG CNC Mill Tools
This page lists information for common/shared tools used with the Taig CNC mill. This list may not be up to date, as tools are broken and replaced.
| Description | Type | Mfg | Material | Flutes | TAIG Spindle |
| 1/4“ CGS End Mill | Flat End Mill | CGS | Carbide | 2 | 6700 rpm |
| 1/16” 2F SE | Flat End Mill | Unknown | HSS | 2 | 5000 rpm |
| 3/16“ 2F SE | Flat End Mill | MA FORD | HSS | 2 | 5000 rpm |
| 1/4”D x 50deg CHAMFER 2F | Spot Drill | Unknown | HSS | 2 | 5000 rpm |
| 1/8“ Flat Endmill | Flat End Mill | Unknown | HSS | 2 | 10500 rpm |
| 1/32” Endmill | Flat End Mill | Unknown | HSS | 2 | 10500 rpm |
Tool Sources
<TBD>
tool/taig_cnc_mill/taig_tools.1509462070.txt.gz · Last modified: 2017/10/31 15:01 by jdmc