tool:loaners:3d-printers:franken-printer
Table of Contents
Franken-Printer
Made from (mostly) extra parts laying around VHS
3D printer that members can take home to do longer prints
Make & Model | Prusa i3 Clone |
---|---|
User Manual | see “Notes on Use” below |
Status | Working as of May 2021 |
Training | Recommended |
Hackable | No |
Usage Restrictions | Members Only |
Owner | VHS |
If it Breaks | Post to 3D Printer slack channel (or fix) |
Arrival Date | May 2019 |
Location | Front office if not out on loan |
Value | Priceless |
Champion | See Compendium of Champions |
Sign Up Sheet | Sign Up |
Specifications
Build Volume | 200 x 200 x 400 mm |
---|---|
Filament Diameter | 1.75 mm |
Layer Resolution | 100-300 microns (0.1-0.3 mm) |
Material | PLA, ABS,PETG |
Nozzle Diameter | 0.4mm |
Technology | Fused Filament Fabrication (FFF) |
Notes on Use
Software
Sample Slicing Settings
Note | Date | Who |
---|---|---|
Wiki entry created | May 24, 2021 | Steve Roy |
tool/loaners/3d-printers/franken-printer.txt · Last modified: 2021/05/25 04:18 by jmart