tool:loaners:3d-printers:bob_the_3d_printer
Table of Contents
Bob the (3D) Printer
3D printer that members can take home to do longer prints
| Make & Model | Prusa i3 Clone |
|---|---|
| User Manual | see “Notes on Use” below |
| Status | Working as of May 2021 |
| Training | Recommended |
| Hackable | With Permission |
| Usage Restrictions | Members Only |
| Owner | On loan to VHS from SteveRoy |
| If it Breaks | Post to 3D Printer slack channel (or fix) |
| Loan Status | Permanent |
| Arrival Date | May 2021 |
| Location | Front office if not out on loan |
| Value | Priceless |
| Champion | See Compendium of Champions |
| Sign Up Sheet | Sign Up |
Specifications
| Build Volume | 200 x 200 x 400 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Layer Resolution | 100-300 microns (0.1-0.3 mm) |
| Material | PLA, ABS,PETG |
| Nozzle Diameter | 0.4mm |
| Technology | Fused Filament Fabrication (FFF) |
Notes on Use
Software
| File Type | STL,OBJ | |
|---|---|---|
| Os Compatibiltiy | Windows, Mac | |
| Software | Slic3r | |
| Cura | ||
| PrusaSlicer | Config file |
| Note | Date | Who |
|---|---|---|
| Wiki entry created | May 24, 2021 | Steve Roy |
tool/loaners/3d-printers/bob_the_3d_printer.txt · Last modified: 2021/05/25 17:35 by brian_zhou