hacks:multitouch
Links to Multitouch Info:
Plan:
Create an FTIR table that is 4:3 ratio. Ideally, it would be a large (1.6 m by 1.2 m) screen.
Bill of Materials:
- OSFRAM IR LEDs (Approx 80 LEDs) - Note: The short end of these is Positive, unlike every other LED on the planet
- A frame - Need someone good with woodworking to build this. Should be vertical
- Sorta-Clear 40 - Can be bought in Delta from a supplier. Fairey & Co. Ltd
- Tracing Paper - (To project the image)
- IR Camera - (Can be made with a Webcam + Chunks of Developed Film. Prefer higher resolution for a larger screen. 1024×768 would be good)
- Projector - 800 x 600 would be fine, but 1024 x 768 would be better.
- A large 1.6m by 1.2m Sheet of Acrylic
hacks/multitouch.txt · Last modified: 2015/12/12 14:31 by 127.0.0.1