This topic does not exist yet
You've followed a link to a topic that doesn't exist yet. If permissions allow, you may create it by clicking on Create this page.
- »
- tool
- »
- laser_cutter
- »
- settings_vhs_laser_cutter_approved_materials_draft
- »
- please_refer_to_tool
- »
- laser_cutter
- »
- settings_vhs_laser_cutter_approved_materials_only_the_following_materials_may_be_cut_or_engraved_on_the_vhs_laser_cutter._if_the_material_you_wish_to_cut_is_not_listed_please_see
- »
- tool
- »
- laser_cutter
- »
- msds_how_do_i_get_a_new_material_approved_material_etch_cut_notes_paper_yes_yes_card_stock_yes_yes_heavy_paper_yes_yes_picture_matting_yes_yes_cardboard_yes_yes_wood_yes_yes_please_avoid_the_use_of_woods_with_any_water_sap_or_a_high_proportion_of_glue._they_quickly_clog_the_filtration_system_and_leave_substantial_residue_on_the_laser_cutter._plywood_-_1
- »
- 4_birch_yes_yes_plywood_-_1
- »
- 8_birch_yes_yes_plywood_1
- »
- 4_flooring_underlay_yes_yes_acrylic_-_1
- »
- 4_yes_yes_acrylic_-_1
- »
- 16_yes_yes_polypropylene_0.75mm_yes_yes_eva_foam_very_thin_4mm_yes_yes_michaels_eva_foam_thin_1
- »
- 4_yes_yes_bought_online_could_not_find_locally_eva_foam_thick_1
- »
- 2_floor_mats_yes_yes_canadian_tire_home_depot_etc._pet
- »
- petg_yes_yes_kapton_polyimide_film_yes_http
- »
- wcam.engr.wisc.edu
- »
- public
- »
- safety
- »
- msds
- »
- kapton_20polyimide_20film_20-_20dupont.pdf_msds_styrene_-_2mm_yes_yes_2mm_white_styrene_sheet_from_hobby_stores_leather_vegetable_tanned_only_yes_yes_banned_materials_the_following_is_a_non-exhaustive_list_of_materials_that_must_not_be_cut_or_engraved_on_the_vhs_laser_cutter._material_reason_wet_or_raw_wood_clogs_up_filter_badly_mdf_hdf_ply_and_reconstructed_wood_clogs_up_filter_badly_coroplast_clogs_up_filter_badly_lexan
- »
- polycarbonate
- »
- makrolon_dense_black_smoke_and_toxic_fumes_-_bisphenol_a_bpa_phenol_and_more_abs_dense_black_smoke_and_toxic_fumes_-_cyanide_and_styrene_gases_pvc_vinyl_toxic_and_corrosive_fumes_-_chlorine_gas_neoprene_polychloroprene_toxic_and_corrosive_fumes_-_chlorine_gas_foam_core_dense_black_smoke_and_toxic_fumes_-_styrene_gas_carcinogenic_toxic_to_the_nervous_system_and_upper_respiratory_tract
- »
- classified_as_very_toxic_delrin_toxic_fumes_-_formaldehyde_moleskine_notebook_covers_toxic_fumes_-_chlorine_-_see_polymer_burnination_link_at_bottom_further_information_tool
- »
- redsail_cm1080_laser_cutter_redsail_cm1080_laser_cutter_tool
- »
- laser_cutter
- »
- operation_manual_operation_manual_tool
- »
- laser_cutter
- »
- workflow_tips_general_workflow_tips_https
- »
- vanhack.ca
- »
- doku.php_id_tool
- »
- laser_cutter
- »
- identifying_unknown_polymers_identifying_unknown_polymers_-_read_this_before_cutting_unknown_materials_http
- »
- www.pololu.com
- »
- docs
- »
- 0j24
- »
- 3_pololu_banned_materials_list_-_some_of_their_allowable_settings_are_different_because_they_have_a_different_read
- »
- expensive_fume
- »
- ventilation_syst