Differences

This shows you the differences between two versions of the page.

--- wiki:tools:jaxen_operating [2026/07/28 01:14] – colinl
+++ wiki:tools:jaxen_operating [2026/07/28 01:30] (current) – colinl
@@ Line 1: / Line 1: @@
-===== Jaxen CNC Operating Guide =====
+====== Jaxen CNC Operating Guide ======
 [[jaxen_cnc_mill|Visit Jaxen's homepage here.]]
@@ Line 20: / Line 20: @@
+-------------------------
+==== Training Program ====
+The Training Program for Jaxen will teach you all the following skills:
+  * General access and group communication when using Jaxen CNC.
+  * Installing and removing collets/bits safely
+  * Choosing the right tools for the job
+  * How to 'drive' Jaxen
+  * Mapping G-code to physical workpiece coordinates
+  * Tool depth calibration
+  * Re-mounting part (multi-job)
+  * Workpiece holding
+  * Understanding basic G-Code for troubleshooting and manual data entry
+  * CAD job prep: For example, choosing inside corner radii based on bits used.
@@ Line 43: / Line 56: @@
 -------------------------
-==== Basic Procedures: ====
+==== Basic Milling Procedures: ====
@@ Line 104: / Line 117: @@
+------------
--------------------------
-Training notes:
-- Choosing inside corner radii based on bits used.
-Skills:
-- Installing and removing collets/bits safely
-- Choosing the right tools for the job
-- Mapping G-code to physical workpiece coordinates
-- Tool depth calibration
-- Re-mounting part (multi-job)
-- workpiece holding
-- Understanding basic G-Code for troubleshooting and manual data entry
     You MAY need a custom mount if: