Differences

This shows you the differences between two versions of the page.

--- wiki:tools:jaxen_cnc_mill [2026/08/30 10:58] – rigidity colinl
+++ wiki:tools:jaxen_cnc_mill [2026/09/13 22:04] (current) – z encoder colinl
@@ Line 40: / Line 40: @@
 **As of 2026 Aug, with software backlash compensation enabled: users can expect accuracy of 0.01mm or better in X and Y.**
-Raw mechanical backlash before compensation: X: 0.08mm, Y: 0.06mm, Z: 0.16mm (Z needs to be investigated further).
+Raw mechanical backlash before compensation: X: 0.08mm, Y: 0.06mm, Z: 0.16mm (Z does not have an encoder!).
 === Rigidity ===
@@ Line 74: / Line 74: @@
   * basic door on front
   * tramming, squaring vice, and other mill accuracy verification procedures.
+  * Add encoder to Z axis, change driver to A spare or get new driver.
 **Non-Critical**
+  * Measure rigidity
   * Increase Y axis limit by moving vice, verify new limits and update specs.
   * Secure XYZ hard limits better, each only held with 1 screw.