≪ View Page

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
wiki:tools:form1sla [2026/05/24 20:19] – update anchor amberwiki:tools:form1sla [2026/05/24 20:59] (current) – amber
Line 15: Line 15:
 ^ Champion           | See [[wiki:tools:compendium_of_champions#tool_champions|Compendium of Champions]]     | ^ Champion           | See [[wiki:tools:compendium_of_champions#tool_champions|Compendium of Champions]]     |
 ===== Information: ===== ===== Information: =====
-<HTML><p style="border:2px dashed red;">Use only Novus 1 cleaner to clean the acrylic surfaces of the tank and the orange hood of the printer.</br> Do NOT use isopropyl alcohol on acrylic</p> +<alert danger> 
-</HTML>+Use **//only//** Novus 1 cleaner to clean the acrylic surfaces of the tank and the orange hood of the printer. **Do NOT use isopropyl alcohol on acrylic.** 
 +</alert>
  
 ==== Resources ==== ==== Resources ====
-read through the [[https://support.formlabs.com/s/topic/0TO1Y000006mfMXWAY?language=en_US|support articles on FormLabs website]]+Read through the [[https://support.formlabs.com/s/topic/0TO1Y000006mfMXWAY?language=en_US|support articles on FormLabs website]]
  
-non-official wiki: [[http://form1printer.pbworks.com]]+Non-official wiki: [[http://form1printer.pbworks.com]]
  
 ==== OpenFL ==== ==== OpenFL ====
Line 28: Line 29:
 ==== Set Up a Print ==== ==== Set Up a Print ====
  
-you will need to download the [[https://github.com/Formlabs/OpenFL#preform|openFL version of Preform]] to slice your model and upload it to the printer.+You will need to download the [[https://github.com/Formlabs/OpenFL#preform|openFL version of Preform]] to slice your model and upload it to the printer.
  
 ==== Cleaning Up ==== ==== Cleaning Up ====
-<html><p style="border:2px dashed red;">always remote the build platform from the machine before removing the tank</p></html>+<alert danger> 
 +**Always** remove the build platform from the machine before removing the tank. 
 +</alert>
  
-==== How to Clean the Tank ====+=== How to Clean the Tank ===
 [[https://forum.formlabs.com/t/form1-emptying-and-cleaning-inside-of-resin-tank/7103/3|Semi official instruction from FormLabs staff]] [[https://forum.formlabs.com/t/form1-emptying-and-cleaning-inside-of-resin-tank/7103/3|Semi official instruction from FormLabs staff]]
  
Line 40: Line 43:
 > 3.  Place the resin tank upside down on a paper towel to let the IPA drip out and dry. > 3.  Place the resin tank upside down on a paper towel to let the IPA drip out and dry.
  
-==== Clean Up After a Successful Print ====+=== Clean Up After a Successful Print ===
  
-remove platform from the printer, remove the print +  * Remove platform from the printer 
-leave resin in tank+  * Remove the print 
 +  * Leave resin in tank
  
-==== Clean Up After a Failed Print ====+=== Clean Up After a Failed Print ===
  
-Remove platform, remove all cured resin from the tank with spatula. use comb if needed, to filter out small bits.+  * Remove platform 
 +  * Remove all cured resin from the tank with spatula. 
 +  * Use comb if needed, to filter out small bits.
  
 ==== Maintenance ==== ==== Maintenance ====