====== Woodshop Dust Extraction Automation System ====== In January 2019 JohnC sought out to build a Woodshop Dust Extraction Automation System similar to the one he built for the Science World exhibits fabrication workshop in 2018. The system uses a Programmable Logic Controller (PLC) control panel connected via long wires to current sensors mounted at each tool. This project is a work in progress as of October 2024, with an expected completion date of December 2024. Please contact JohnC on the Talk or Slack for details, or see #vhs-air-quality-control slack channel The following tools are slated to be connected to the system: |1. [[tool:Thickness Sander]]| |2. [[tool:Table Saw]] | |3. [[tool:Hammer Jointer/Planer]] | |4. [[tool:Wood CNC]] | | 5. [[tool:Bernie the Spindle Sander]] | | 6. Bandsaw (eventually I hope we upgrade beyond our 10" bandsaw; but if we do it should just be 1:1 replacement) – Currently small port, but we should probably future-proof with 4" | |7. Drill Press – No connector; having a Loc-Line based suction would be ideal. | |8. [[tool:Bosch Miter Saw]] – I’ve recently seen a good setup, but it would require making a miter saw bench| |9. Router Table – No collection port| |10. Lathe – Would need a wide collection for chips. |