tool:powertig250ex
Differences
This shows you the differences between two versions of the page.
tool:powertig250ex [2019/11/17 20:44] – created lukecyca | tool:powertig250ex [2021/09/16 19:02] (current) – metal_janet | ||
---|---|---|---|
Line 19: | Line 19: | ||
* [[https:// | * [[https:// | ||
- | ===== Warning: Power must be limited! | + | ===== POWER NO LONGER NEEDS TO BE LIMITED |
- | We have to keep the machine current draw from the wall down below 14 amps to avoid popping a fuse. Yes I mean fuse, not a breaker. The fuse box is locked because you can get an arc flash when changing | + | Just make sure you're running |
- | + | NO THORIATED TUNGSTENS in the shop! We do not have the appropriate dust control on our grinder to deal with radioactive dust. Use ceriated (steel) or zirconiated (aluminum) instead. | |
- | The machine is rated for 32 amp draw max, so don't exceed 40% of any of its max ratings: | + | |
- | + | ||
- | * TIG: 250A x 40% = 100A | + | |
- | * Stick: 200A x 40% = 80A | + | |
tool/powertig250ex.1574023497.txt.gz · Last modified: 2019/11/17 20:44 by lukecyca