≪ View Page

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
wiki:tools:laser_cutter:settings [2026/01/21 21:27] – created - external edit 127.0.0.1wiki:tools:laser_cutter:settings [2026/02/12 11:18] (current) – admin
Line 1: Line 1:
 ====== VHS Laser Cutter Approved Materials ====== ====== VHS Laser Cutter Approved Materials ======
-Only the following materials may be cut or engraved on the [[tool:redsail_cm1080_laser_cutter|VHS Laser Cutter]]. If the material you wish to cut is not listed, please see: [[tool:laser_cutter:MSDS|How do I get a new material approved?]]+Only the following materials may be cut or engraved on the [[wiki:tools:redsail_cm1080_laser_cutter|VHS Laser Cutter]]. If the material you wish to cut is not listed, please see: [[wiki:tools:laser_cutter:MSDS|How do I get a new material approved?]]
    
 Settings are provided here as a starting point. Always do test cuts to find optimal settings. Settings are provided here as a starting point. Always do test cuts to find optimal settings.
Line 61: Line 61:
  
 ====== Banned Materials ====== ====== Banned Materials ======
-The following is a non-exhaustive list of materials that must not be cut or engraved on the [[tool:redsail_cm1080_laser_cutter|VHS Laser Cutter]]. +The following is a non-exhaustive list of materials that must not be cut or engraved on the [[wiki:tools:redsail_cm1080_laser_cutter|VHS Laser Cutter]]. 
  
 ^ Material ^ Reason ^ ^ Material ^ Reason ^
Line 89: Line 89:
 ====== FURTHER INFORMATION ====== ====== FURTHER INFORMATION ======
  
-  * [[tool:redsail_cm1080_laser_cutter|Redsail CM1080 Laser Cutter]] +  * [[wiki:tools:redsail_cm1080_laser_cutter|Redsail CM1080 Laser Cutter]] 
-  * [[tool:laser_cutter:operation_manual|Operation Manual]] +  * [[wiki:tools:laser_cutter:operation_manual|Operation Manual]] 
-  * [[tool:laser_cutter:workflow_tips|General Workflow Tips]]+  * [[wiki:tools:laser_cutter:workflow_tips|General Workflow Tips]]
   * [[http://www.adafruit.com/blog/?p=16409|Determining Kerf]]   * [[http://www.adafruit.com/blog/?p=16409|Determining Kerf]]
   * [[https://vanhack.ca/doku.php?id=tool:laser_cutter:identifying_unknown_polymers|Identifying Unknown Polymers]] -  **READ THIS BEFORE CUTTING UNKNOWN MATERIALS**   * [[https://vanhack.ca/doku.php?id=tool:laser_cutter:identifying_unknown_polymers|Identifying Unknown Polymers]] -  **READ THIS BEFORE CUTTING UNKNOWN MATERIALS**
   * [[http://www.pololu.com/docs/0J24/3|Pololu banned materials list]] - Some of their allowable settings are different because they have a different(read: expensive) fume/ventilation system   * [[http://www.pololu.com/docs/0J24/3|Pololu banned materials list]] - Some of their allowable settings are different because they have a different(read: expensive) fume/ventilation system