≪ View Page

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
wiki:tools:laser_cutter:operation_manual [2026/02/12 11:23] – adminwiki:tools:laser_cutter:operation_manual [2026/02/12 11:27] (current) – admin
Line 109: Line 109:
  
 Upon successful completion of the training, your membership account on the VHS Membership Management System will be granted Laser Access.  Upon successful completion of the training, your membership account on the VHS Membership Management System will be granted Laser Access. 
- 
-To log into the laser cutter: 
- 
- 1. Get on the VHS wifi - you will not be able to access the laser login system if you're not on the local wifi 
- 2. Visit [[https://laser.vanhack.ca|laser.vanhack.ca]] 
- 3. Sign in using your membership.vanhack.ca (nomos) credentials. 
- 4. Press the big red button to unlock the laser's on switch 
- 5. Flip the physical switch on the outside wall next to the laser computer 
  
 ====== OPERATING THE LASER CUTTER ====== ====== OPERATING THE LASER CUTTER ======
Line 134: Line 126:
  
 ===== Authentication ===== ===== Authentication =====
 +
 The laser cutter has a software-controlled Laser Access System for restricting access to trained members and automatically controlling power to the laser and peripherals. The Laser Access System has an on/off switch and lights which indicate the status. The laser cutter has a software-controlled Laser Access System for restricting access to trained members and automatically controlling power to the laser and peripherals. The Laser Access System has an on/off switch and lights which indicate the status.
  
 Using a smartphone or laptop: Using a smartphone or laptop:
-  - Connect to the VHS WiFi network. + 
-  - Navigate to http://laser.vanhack.ca +  - Get on the VHS wifi - you will not be able to access the laser login system if you're not on the local wifi 
-  - Select which Linked Account you would like to use for authentication +  - Visit [[https://laser.vanhack.ca|laser.vanhack.ca]] 
-  - If necessary, enter you login credentials for the Linked Account. +  - Sign in using your membership.vanhack.ca (nomos) credentials. 
-  - Authorize the connection +  - Click the big red "Unlock" button to enable the laser's ON switch
-  - Click the 'Unlock' button+
  
 Using the Laser Cutter computer: Using the Laser Cutter computer:
-  - (Turn the computer on and login)+  - (Turn the computer on and login - password is written on a sticker on the computer's display)
   - Navigate to http://laser.vanhack.ca or open the "Laser Access" link on the desktop    - Navigate to http://laser.vanhack.ca or open the "Laser Access" link on the desktop 
-  - Select which Linked Account you would like to use for authentication +  - Log in using your membership.vanhack.ca (nomos) credentials.
-  - If necessary, enter you login credentials for the Linked Account. +
-  - Authorize the connection+
   - Click the 'Unlock' button   - Click the 'Unlock' button