≪ View Page

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
wiki:tools:laser_cutter:operation_manual [2026/02/12 11:19] – adminwiki:tools:laser_cutter:operation_manual [2026/02/12 11:27] (current) – admin
Line 104: Line 104:
 ===== TRAINING AND SETUP ===== ===== TRAINING AND SETUP =====
 ==== Complete VHS Laser Cutter Training ==== ==== Complete VHS Laser Cutter Training ====
-To use the Laser Cutter, you must be a [[http://vanhack.ca/membership/|member]] of Vancouver Hack Space and complete the [[tool:laser_cutter:training|VHS Laser Cutter Training]].+To use the Laser Cutter, you must be a [[http://vanhack.ca/membership/|member]] of Vancouver Hack Space and complete the [[wiki:tools:laser_cutter:training|VHS Laser Cutter Training]].
  
 ==== Setup Authentication ==== ==== Setup Authentication ====
-Upon successful completion of the training, your membership account on the VHS Membership Management System will be granted Laser Access. If you haven't done so already, you need to link your VHS Membership to your Google, Slack, and/or GitHub account. 
  
-  - Log-in to the membership management system (http://membership.vanhack.ca) using email and password. +Upon successful completion of the training, your membership account on the VHS Membership Management System will be granted Laser Access. 
-  - Under User Profile, find the Access tab.  +
-  - Click the name of the account you want to link +
-  - Enter your credentials for that account. +
-  - Authorize the Open Authorization connection. +
- +
-If successful, your User profile will now list the linked account.+
  
 ====== OPERATING THE LASER CUTTER ====== ====== OPERATING THE LASER CUTTER ======
Line 133: Line 126:
  
 ===== Authentication ===== ===== Authentication =====
 +
 The laser cutter has a software-controlled Laser Access System for restricting access to trained members and automatically controlling power to the laser and peripherals. The Laser Access System has an on/off switch and lights which indicate the status. The laser cutter has a software-controlled Laser Access System for restricting access to trained members and automatically controlling power to the laser and peripherals. The Laser Access System has an on/off switch and lights which indicate the status.
  
 Using a smartphone or laptop: Using a smartphone or laptop:
-  - Connect to the VHS WiFi network. + 
-  - Navigate to http://laser.vanhack.ca +  - Get on the VHS wifi - you will not be able to access the laser login system if you're not on the local wifi 
-  - Select which Linked Account you would like to use for authentication +  - Visit [[https://laser.vanhack.ca|laser.vanhack.ca]] 
-  - If necessary, enter you login credentials for the Linked Account. +  - Sign in using your membership.vanhack.ca (nomos) credentials. 
-  - Authorize the connection +  - Click the big red "Unlock" button to enable the laser's ON switch
-  - Click the 'Unlock' button+
  
 Using the Laser Cutter computer: Using the Laser Cutter computer:
-  - (Turn the computer on and login)+  - (Turn the computer on and login - password is written on a sticker on the computer's display)
   - Navigate to http://laser.vanhack.ca or open the "Laser Access" link on the desktop    - Navigate to http://laser.vanhack.ca or open the "Laser Access" link on the desktop 
-  - Select which Linked Account you would like to use for authentication +  - Log in using your membership.vanhack.ca (nomos) credentials.
-  - If necessary, enter you login credentials for the Linked Account. +
-  - Authorize the connection+
   - Click the 'Unlock' button   - Click the 'Unlock' button
  
Line 186: Line 177:
 The default settings for each operations almost always need to be changed. To change the settings of an operation, double click the color in the top left list. Generally, there are just two setting that need to be selected: power and speed. The default settings for each operations almost always need to be changed. To change the settings of an operation, double click the color in the top left list. Generally, there are just two setting that need to be selected: power and speed.
  
-Some experimentation is often required to get the desired results. Refer to the [[tool:laser_cutter:settings|Materials and Settings Chart]] for reasonable starting points. It is recommended to bring scrap material that has identical properties (type, thickness, colour, etc) to what you want to finally lase. Use this scrap to test and verify that the laser cutter, your material, and your design are behaving as you expect.+Some experimentation is often required to get the desired results. Refer to the [[wiki:tools:laser_cutter:settings|Materials and Settings Chart]] for reasonable starting points. It is recommended to bring scrap material that has identical properties (type, thickness, colour, etc) to what you want to finally lase. Use this scrap to test and verify that the laser cutter, your material, and your design are behaving as you expect.
  
 ==== Power ==== ==== Power ====
Line 347: Line 338:
   * Follow the normal shutdown procedures above.   * Follow the normal shutdown procedures above.
   * Put a sign on the laser cutter that says "OUT OF ORDER - DO NOT USE".   * Put a sign on the laser cutter that says "OUT OF ORDER - DO NOT USE".
-  * Notify the [[committees:lcc|Laser Cutter Committee]] by posting to the [[https://vanhack.slack.com/messages/C03UZL52P/|#laser]] channel on Slack and by posting a message on the [[https://talk.vanhack.ca|Forum]]. Include the following information at a minimum:+  * Notify the [[wiki:committees:lcc|Laser Cutter Committee]] by posting to the [[https://vanhack.slack.com/messages/C03UZL52P/|#laser]] channel on Slack and by posting a message on the [[https://talk.vanhack.ca|Forum]]. Include the following information at a minimum:
     * What is wrong with the laser cutter.     * What is wrong with the laser cutter.
     * What you were doing at the time it stopped working.     * What you were doing at the time it stopped working.
Line 355: Line 346:
 ====== FURTHER INFORMATION ====== ====== FURTHER INFORMATION ======
  
-  * [[tool:redsail_cm1080_laser_cutter|Redsail CM1080 Laser Cutter]] +  * [[wiki:tools:redsail_cm1080_laser_cutter|Redsail CM1080 Laser Cutter]] 
-  * [[tool:laser_cutter:settings|Laser Cutter Awesomeness Ingredients!]] +  * [[wiki:tools:laser_cutter:settings|Laser Cutter Awesomeness Ingredients!]] 
-  * [[tool:laser_cutter:workflow_tips|General Workflow Tips]]+  * [[wiki:tools:laser_cutter:workflow_tips|General Workflow Tips]]
  
 Questions may be directed to the Laser Cutter Committee. Questions may be directed to the Laser Cutter Committee.