Differences

This shows you the differences between two versions of the page.

--- wiki:groups:lasercutter [2026/02/17 10:01] – cory
+++ wiki:groups:lasercutter [2026/02/17 10:04] (current) – removed cory
@@ Line 1: / Line 1: @@
-<!DOCTYPE markdown>
-# VHS Laser Cutter
-One of VHS' most popular tools, our [80W CO2 Laser Cutter](/wiki/tools/redsail_cm1080_laser_cutter), and the associated [filtration system](/wiki/tools/laserfilter), is managed by the [Laser Cutter Committee (LCC)](wiki:committees:lcc). The laser cutter area is located just past the entrance to the paint and mess room, along the west wall of the space.
-![A photo of the laser cutter, and the laser cutter desk](:area:lasercutarea.jpg?direct&800)
-The big green box is the laser filter stack, and below that is [laser materials storage](/wiki/area/material_storage).
-## Laser Training
-This tool requires training to use, so you don't hurt yourself or the machine
-- [About training](/wiki/tools/laser_cutter/training)
-- [Operation manual](/wiki/tools/laser_cutter/operation_manual)
-## Materials
-<alert warning>
-Only approved materials may be cut on the laser. Violating this rule is grounds for suspension of membership - you put yourself, the rest of the membership, and the tool in danger!
-</alert>
-- [Approved materials](/wiki/tools/laser_cutter/settings)
-- [How to identify unknown polymers](/wiki/tools/laser_cutter/identifying_unknown_polymers)
-- [Laser materials guide](/wiki/tools/laser_cutter/materials)
-- [How to get new materials approved](/wiki/tools/laser_cutter/msds)
-## Booking
-Because the laser is so popular, we have a booking system to reserve the laser. This is not used to book training, only for regular usage.
-- [Book the laser](https://booking.vanhack.ca)
-- [View the booking calendar](/wiki/tools/laser_cutter/laser_calendar)
-## Resources
-- [Laser lens focus information](/wiki/tools/laser_cutter/laser_focus_lens_focal_length)
-- [Laser maintenance information](/wiki/tools/laser_cutter/maintenance)
-- [Where to buy replacement parts](/wiki/tools/laser_cutter/parts)
-- [Laser cutter monitoring sensors](/wiki/tools/laser_cutter/telemetry)
-- [How to install a new tube](/wiki/tools/laser_cutter/tubereplacement)
-## Out of date resources
-- [out of date Software usage tips](/wiki/tools/laser_cutter/workflow_tips)
-- [out of date alignment guide](/wiki/tools/laser_cutter/aligning)
-- [out of date chiller info](/wiki/tools/laser_cutter/custom_chiller)