≪ View Page

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
wiki:groups:lasercutter:start [2026/02/17 10:04] – corywiki:groups:lasercutter:start [2026/02/17 12:19] (current) – admin
Line 1: Line 1:
 <!DOCTYPE markdown> <!DOCTYPE markdown>
-# VHS Laser Cutter+# Laser Cutting and Engraving at VHS
  
 One of VHS' most popular tools, our [80W CO2 Laser Cutter](/wiki/tools/redsail_cm1080_laser_cutter), and the associated [filtration system](/wiki/tools/laserfilter), is managed by the [Laser Cutter Committee (LCC)](wiki:committees:lcc). The laser cutter area is located just past the entrance to the paint and mess room, along the west wall of the space. One of VHS' most popular tools, our [80W CO2 Laser Cutter](/wiki/tools/redsail_cm1080_laser_cutter), and the associated [filtration system](/wiki/tools/laserfilter), is managed by the [Laser Cutter Committee (LCC)](wiki:committees:lcc). The laser cutter area is located just past the entrance to the paint and mess room, along the west wall of the space.
Line 7: Line 7:
  
 The big green box is the laser filter stack, and below that is [laser materials storage](/wiki/area/material_storage). The big green box is the laser filter stack, and below that is [laser materials storage](/wiki/area/material_storage).
 +
 +Connect with other laser users on the #laser [Slack channel](/wiki/start#slack_chat).
  
 ## Laser Training ## Laser Training
  
-<alert warning>+<alert info>
 This tool requires training to use, so you don't hurt yourself or the machine This tool requires training to use, so you don't hurt yourself or the machine
-<alert>+</alert>
  
-- [About training](/wiki/tools/laser_cutter/training)+- [How to request training](/wiki/tools/laser_cutter/training)
 - [Operation manual](/wiki/tools/laser_cutter/operation_manual) - [Operation manual](/wiki/tools/laser_cutter/operation_manual)
  
Line 20: Line 22:
  
 <alert danger> <alert danger>
-Only approved materials may be cut on the laser. Violating this rule is grounds for suspension of membership - it puts yourself, other members, and the tool in danger!+**Only approved materials may be cut on the laser**. Violating this rule could lead to suspension of membership - it puts yourself, other members, and the tool in danger!
 </alert> </alert>
  
Line 39: Line 41:
  
 - [Laser lens focus information](/wiki/tools/laser_cutter/laser_focus_lens_focal_length) - [Laser lens focus information](/wiki/tools/laser_cutter/laser_focus_lens_focal_length)
-- [Laser maintenance information](/wiki/tools/laser_cutter/maintenance) 
 - [Where to buy replacement parts](/wiki/tools/laser_cutter/parts) - [Where to buy replacement parts](/wiki/tools/laser_cutter/parts)
 - [Laser cutter monitoring sensors](/wiki/tools/laser_cutter/telemetry) - [Laser cutter monitoring sensors](/wiki/tools/laser_cutter/telemetry)
Line 49: Line 50:
 - [out of date alignment guide](/wiki/tools/laser_cutter/aligning) - [out of date alignment guide](/wiki/tools/laser_cutter/aligning)
 - [out of date chiller info](/wiki/tools/laser_cutter/custom_chiller) - [out of date chiller info](/wiki/tools/laser_cutter/custom_chiller)
 +- [old laser maintenance logs (see talk for more up to date logs)](/wiki/tools/laser_cutter/workflow_tips?idx=wiki%3Atools%3Alaser_cutter%3Amaintenance_logs)