tutorials:raspberry_pi_3_headless
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
tutorials:raspberry_pi_3_headless [2017/08/24 07:37] – removed mimi_x | tutorials:raspberry_pi_3_headless [2017/08/24 07:42] (current) – added details to instreuction, mainly commands for various steps mimi_x | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ======Setting Up Raspberry Pi 3 Headless, with Remote Desktop====== | ||
+ | |||
+ | This guide assumes you are running Raspbian Jessie or later on your Pi3, and you are setting it up with headless (without dedicated monitor and input devices) and doing so at the Hack Space. | ||
+ | The remote desktop protocal (RDP) is used. | ||
+ | |||
+ | ===== What You Will Need ===== | ||
+ | |||
+ | * Raspberry Pi 3 | ||
+ | * MicroSD loaded with a bootable image of [[https:// | ||
+ | * ethernet connection | ||
+ | * microSD card reader | ||
+ | * Mac or Windows PC with the following installed: | ||
+ | * [[https:// | ||
+ | * [[https:// | ||
+ | * //PC ONLY:// [[https:// | ||
+ | ===== Procedure ===== | ||
+ | - Enable SSH on the pi | ||
+ | * do so by adding a file name '' | ||
+ | - Insert SD and connect Pi to power and ethernet | ||
+ | - figure out the IP for the Pi with nmap | ||
+ | * if you are at the space, use the command< | ||
+ | - SSH into the Pi | ||
+ | * the default user/ | ||
+ | - enable VNC and optionally, wifi | ||
+ | * enter < | ||
+ | - install XRDP and vnc4server | ||
+ | * enter the following into terminal. your pi will reboot and your will need to re-connect via ssh | ||
+ | < | ||
+ | sudo apt-get install vnc4server | ||
+ | sudo reboot </ | ||
+ | - after reboot, connect to pi using Remote Desktop software on your computer | ||
+ | *the credential are the same as ssh | ||
+ | - // | ||
+ | |||
tutorials/raspberry_pi_3_headless.txt · Last modified: 2017/08/24 07:42 by mimi_x