Differences

This shows you the differences between two versions of the page.

--- tutorials:raspberry_pi_3_headless [2017/08/21 23:26] – mimi_x
+++ tutorials:raspberry_pi_3_headless [2017/08/24 07:42] (current) – added details to instreuction, mainly commands for various steps mimi_x
@@ Line 16: / Line 16: @@
 ===== Procedure =====
   - Enable SSH on the pi
+      * do so by adding a file name ''ssh'' with no extension to the ''boot'' folder
   - Insert SD and connect Pi to power and ethernet
   - figure out the IP for the Pi with nmap
+      * if you are at the space, use the command<code> nmap -sN 162.16.1-5.0/24 </code> to list all the device connected. look for device with ''raspberrypi'' in its name. note the ip address.
   - SSH into the Pi
-  - enable VNC
+      * the default user/password should be ''pi''/''raspberry'' for ssh
+  - enable VNC and optionally, wifi
+      * enter <code> sudo raspi-config </code> and use arrow keys to navigate and enable VNC and wifi
   - install XRDP and vnc4server
+      * enter the following into terminal. your pi will reboot and your will need to re-connect via ssh
+        <code> sudo apt-get install -y xrdp
+sudo apt-get install vnc4server
+sudo reboot </code>
   - after reboot, connect to pi using Remote Desktop software on your computer
      *the credential are the same as ssh