Vancouver Hack Space

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Wood CNC ======

{{:tool:2c50ce61816d04a5fc08c3d5105438815c52d452.jpeg?400|}}
^ model | Custom "LukeB" Model CNC Router |
^ Status             | Operational |
^ Usage Restrictions | Members with Training                     |
^ Training           | Mandatory                                                              |
^ User certification required | YES |
^ Hackable           | NO                                                              |
^ Owner              | Luke B                                          |
^ If it Breaks       | Let Luke know, put up an Out of Order sign   |
^ Loan Status        | VHS Owned                  |
^ Arrival Date       | November 2018                                                                   |
^ Location           | Workshop                                      |
^ Champion           | [[tool:compendium_of_champions | Luke B]] |

This is a custom wood CNC, with materials funded by workshops run by VHS members.

===== Safety =====

If you don't know what you are doing don't touch it.


===== Specifications =====

This machine is roughly based on the [[https://openbuilds.com/builds/openbuilds-ox-cnc-machine.341/|OpenBuilds OX CNC Machine]].

Control Software: [[http://www.themakersguide.com/home/products/mach3|Mach 3]]

Control Interface: [[https://www.buildyourcnc.com/Documents/USB%20Motion%20Card%20STB4100%20Manual.pdf|Mach3 USB Motion Card (STB4100)]]

Motor Drivers: ?

Work Envelope: ?

===== Training =====

Mandatory training specific to this machine is required.


===== Speeds & Feeds =====

TODO


===== Maintenance Log =====

Any maintenance, repairs, relocations, changes, etc to the tool should be logged below with a note, date and who!

^ Note               ^ Date         ^ Who       ^
| Built | 2018 | @lukeo |
| [[https://talk.vanhack.ca/t/wood-cnc-router-updates/8303|Commissioned for use]] | Sept, 2018 | @lukeo |
| [[https://talk.vanhack.ca/t/wood-cnc-is-online/8934|Moved to new workshop location and re-setup]]| March, 2019 | @lukecyca |
| [[https://talk.vanhack.ca/t/wood-cnc-y-axis-repeatability/9156|Y-Axis issues and fix]] | May, 2019 | @lukeo / @lukecyca |
| [[https://talk.vanhack.ca/t/dusties-tensioned-belts/|Belt replacement and new tensioners]] | Jan, 2024 | @imagesurgery |