Differences

This shows you the differences between two versions of the page.

--- tool:vinyl_cutter [2017/12/14 21:31] – hughl87
+++ tool:vinyl_cutter [2019/07/04 06:32] – mimi_x
@@ Line 56: / Line 56: @@
 Chances are the blade is dull and you won't get a very good cut. To replace the blade, open the bracket on the traveling cut head and remove the cylindrical part. Unscrew the top to get at the blade. Don't lose any of these parts!
-Searching AliExpress or eBay for "Roland GCC" will yield plenty of inexpensive blade options.
+We now have two different blade holders, a darker one that holds 2.5mm diameter blades, and a silver one that holds 2mm diameter blades.
+Since the 2mm blades are much more common and easier to come by, there is almost no reason to use the 2,5 mm holder.
-Common blades are 2mm diameter but our blade holder requires 2.5mm blades. A 2mm will sort of work, but with significant slop.
 === Blade Angle ===
-According the the knowledge base linked below:
+According to the knowledge base linked below:
 <WRAP center round box 85%>
@@ Line 127: / Line 130: @@
 ==== More info ====
+  * [[http://www.uscuttersupport.com/kbpage.html|US Cutter Support Knowledge Base]].
-  * [[US Cutter Support Knowledge Base|http://www.uscuttersupport.com/kbpage.html]]