User Tools

Site Tools


tool:vacuum_chamber

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tool:vacuum_chamber [2016/06/16 20:59]
mike_taylor
tool:vacuum_chamber [2019/04/06 23:01] (current)
00739
Line 1: Line 1:
 ====== Vacuum Chamber ====== ====== Vacuum Chamber ======
  
-Located in the machine shop on the large shelf. It has a dedicated vacuum pump attached to the lid.+^ Status ​            | (Unknown, Operational,​ Offline, ) as of Date                           | 
 +^ Training ​          | Optional, Recommended,​ Mandatory ​                                      | 
 +^ Hackable ​          | YES or NO                                                              | 
 +^ Usage Restrictions | (Anyone, Members Only, Keyholders Only, Whitelist) ​                    | 
 +^ Owner              | (VHS or Name of proper owner) ​                                         | 
 +^ If it Breaks ​      | (Panic procedure, usually involving emailing list and "​broken"​ sign)   | 
 +^ Loan Status ​       | (Unknown, Owned, Permanent, Temporary, Semi-Permanent ​                 | 
 +^ Arrival Date       | Date                                                                   | 
 +^ Location ​          | (Location within VHS, eg Workshop ​                                     | 
 +^ Value              | $$                                                                     | 
 +^ Champion ​          | See [[tool:​compendium_of_champions#​tools|Compendium of Champions]] ​    | 
 + 
 +===== Safety ===== 
 + 
 +This should outline safety concerns and guidelines for the tool and it's operation. 
 + 
 +===== Specifications ===== 
 + 
 +It has a dedicated vacuum pump attached to the lid. 
 + 
 +===== Tutorial =====
  
 Usage is pretty simple, ensure a good seal of the lid, and pull the air out using the vacuum pump. The valves point toward the direciton of airflow, you want to open the valve to the pump and close the valve to the outside while pulling. ​ Usage is pretty simple, ensure a good seal of the lid, and pull the air out using the vacuum pump. The valves point toward the direciton of airflow, you want to open the valve to the pump and close the valve to the outside while pulling. ​
tool/vacuum_chamber.txt · Last modified: 2019/04/06 23:01 by 00739