Differences

This shows you the differences between two versions of the page.

--- tool:sherline_cnc_mill [2016/09/14 00:53] – jarrett
+++ tool:sherline_cnc_mill [2018/03/09 05:01] (current) – Added link to PCB milling with Sherline colorcoded
@@ Line 11: / Line 11: @@
 ^ Arrival Date       | June 2010                                                                   |
 ^ Location           | Workshop                                      |
-^ Value              | $2000                                                                     |
 ^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
 ====== Information: ======
-Forum thread: https://talk.hackspace.ca/t/vhs-group-project-sherline-cnc-mill/2588
+Forum thread: https://talk.vanhack.ca/t/vhs-group-project-sherline-cnc-mill/2588
 For regular mill's operation:\\
@@ Line 32: / Line 31: @@
 __Required:__
   * Safety Glasses
-  * Clamping devices (apply https://talk.hackspace.ca/t/vhs-group-project-sherline-cnc-mill/2588 liberally; better to have more clamps at moderate pressure than few at great pressure, to avoid damaging the T-slot)
+  * Clamping devices (apply https://talk.vanhack.ca/t/vhs-group-project-sherline-cnc-mill/2588 liberally; better to have more clamps at moderate pressure than few at great pressure, to avoid damaging the T-slot)
   * an experienced machine operator (if this is not you, you must get someone to help you!)
   * long hair must be tied back
@@ Line 76: / Line 75: @@
   * Remove your tool(s) from the chuck.
   * Clean up the cutting leftovers.  The next user thanks you!
+====== PCB Milling ======
+See [[PCB Milling With Sherline]].
 ====== Notes for later: ======