User Tools

Site Tools


tool:redsail_cm1080_laser_cutter

This is an old revision of the document!


Redsail CM1080 Laser Cutter

Everybody loves lasers

Status BROKE AF as of 2017-02-27 (tube broke and was replaced, PSU is suspect)
Training YES (see below)
Hackable NO
Usage Restrictions Members Only
Owner Vancouver Hack Space
If it Breaks Turn off. Put a BROKEN sign on machine. Notify forums and Laser Cutter Committee immediately.
Loan Status Owned by VHS
Arrival Date March 30, 2012
Location Back of VHS
Value $3500 + ~$1000 to get it here and set up
Champion See Compendium of Champions

Laser Cutter User Certification

Anyone who wishes to use the laser cutter must be both a VHS member, and have completed a laser cutter training class (class dates are announced on the VHS forum) and are on our calendar

If you are planning to take a class, please first read through the operation manual.

Specifications

  • Work area size: 1000mm x 800mm
  • Bed size: 1020mm x 820mm
  • Power: 80W
  • Controller: AWC-608B (replacement for original, installed 2013)
  • Power supply: LSR-JN80WCO2-2V
    • Input: AC 220V
    • Power: 80Watt, 100Watt peak
    • Triggering Voltage: 28KV
    • Operating Voltage: 22KV
    • Current: 32mA max
    • 3pin terminal pinout: G, AC, AC
    • 6pin terminal pinout: H, L, WP, G, IN, 5V

FURTHER INFORMATION

Tutorials

Possible upgrades

tool/redsail_cm1080_laser_cutter.1488318172.txt.gz · Last modified: 2017/02/28 21:42 by alex_cruise

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki