Differences

This shows you the differences between two versions of the page.

--- tool:manual_lathe [2016/04/24 07:24] – rsim
+++ tool:manual_lathe [2021/11/03 05:55] (current) – Updated Google Drive link due to security changes rsim
@@ Line 1: / Line 1: @@
-====== Manual Lathe ======
+====== Metal Lathe ======
-{{::green-manual-lathe.jpg?200 |}}
-Summary description of the tool and perhaps some misc notes about it's existence!
 ^ Status             | Operational                           |
 ^ Training           | Required                                       |
 ^ Hackable           | NO                                                              |
 ^ Usage Restrictions | Members Only                     |
-^ Owner              | Family friend of John Craver.                                          |
+^ Owner              | VHS                                          |
-^ If it Breaks       | Contact Richard Sim or John Craver   |
+^ If it Breaks       | Contact Richard Sim   |
-^ Loan Status        | Temporary                  |
 ^ Arrival Date       | November 2013                                                                   |
 ^ Location           | Workshop                                      |
-^ Value              | $$$$$                                                                     |
 ^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
+{{ ::green-manual-lathe.jpg?200|}}
 ===== Safety =====
-There is a **mandatory** 3-hour training course that must be taken before the lathe may be used.
+There is a **mandatory** 4-5 hour safety and training course that must be taken before the lathe may be used.
 ===== Specifications =====
-It is a 11x25 Advance TY-1125BH metal "engine" lathe, manufactured in 1985.
+It is a 11x25 Advance TY-1125BH metal "engine" lathe, manufactured in 1985, which is actually a [[http://www.lathes.co.uk/taiwan/|generic Taiwanese lathe]] that is sold under many different brand names. The same basic design is still in production now and being sold by most major hobby machinery manufacturers (Grizzly, Busy Bee, etc), so parts should be somewhat available.
 x25 means that a maximum 11" diameter stock can be turned over the bed (NOT over the cross-slide however!), and a maximum length of 25" stock can be turned between centres (NOT in a 3/4 jaw chuck!).
+Manuals for various almost identical lathes are located in the VHS-Documentation Google Drive shared folder which can be accessed below. Each manual is quite different, covering different topics in different depths and at varying qualities of both images and writing, so take a look through them all for the information you're looking for.
+<WRAP center round download 60%>
+[[https://drive.google.com/drive/folders/0B36krD7JxvJbZEVod1ZyZEF2dzQ?resourcekey=0-8SH2Lo5XrOd15CNmS0nKvA&usp=sharing|Lathe manuals in Google Drive]]
+</WRAP>
 ===== Materials =====
+**Allowed**
   * Aluminum
   * Steel
   * Brass (with [[http://www.homemodelenginemachinist.com/showthread.php?t=7914|special tooling]])
+  * Delrin, ABS, PVC, etc (most plastics)
+  * Titanium (**note:** special care is required as titanium may ignite when machined!)
+**Banned**
+  * Wood
+  * Fibrous materials
+  * Stone
+  * Anything that creates dust or grit.
+  * Pretty much anything that's not metal or plastic.
-Cutting speeds can be determined easily by using this {{:tool:cutting-speed-nomogram.png?linkonly|cutting speed nomogram}} The {{:tool:lathe-cutting-speed.png?linkonly|original cutting speed nomogram}} came from Ian at the BCSME.
+==== Cutting Speeds ====
+Cutting speeds can be determined easily by using this {{:tool:cutting-speed-nomogram.png?linkonly|cutting speed nomogram}}. The {{:tool:lathe-cutting-speed.png?linkonly|original cutting speed nomogram}} came from Ian at the BCSME.
+When getting into hardened, tempered, or annealed steels along with carbide (necessary) cutters, cutting speeds and depths can be unpredictable when going for a high-quality finish, and experimentation may be required. The video [[https://www.youtube.com/watch?v=dwOyhzWtnOY|The Effects of Heat Treatment on CrMo 4140 Steel in Turning Operations Part 2]] is a great example of this, but do note that the video is from a much larger and more rigid lathe than ours! [[https://www.youtube.com/watch?v=j0CCdI5nbzw|Part 1]] has some good background information at the beginning, but Part 2 usurps its results.
+===== Helpful Links =====
+  * [[http://mindworks.shoutwiki.com/wiki/Cutter_Types_(Lathe)|Cutter types]]
+  * [[https://qph.ec.quoracdn.net/main-qimg-d41f0ff2190e2501f7d518045398d233-c|Parts of a lathe]]
 ===== Essential Tooling for a Personal Lathe Kit =====
@@ Line 51: / Line 71: @@
 TODO
-===== Maintenance Log ====
+==== Thomas L. ====
+[[http://www.steves-workshop.co.uk/tips/toolgrinding/toolgrinding.htm]]
+[[http://mindworks.shoutwiki.com/wiki/Cutter_Types_(Lathe)]]
+The VHS lathe has a quick tool change, takes the common 250-1xx series AXA. [[https://www.amazon.ca/gp/product/B01M19JZF3/ref=ox_sc_sfl_title_15?ie=UTF8&psc=1&smid=A32NIDEAQZYLTL]]
+===== Maintenance Log =====
 ^ Note               ^ Date         ^ Who       ^
+| V-Belts need replacing | Dec 2019 |  |
+| Motor changed & rewired | ??? - Nov 2019 | Bill & ??? |
 | Routine maintenance | Dec 2015 | Richard S. |
 | Wiki entry created | Nov 20, 2013 | Thomas L. |
+==== Maintenance Information ====
+== Belts: ==
+Spindle belt: B-31
+Motor Belt: B-28
+Source from auto parts stores, Grainger or Mcmaster.
+[[https://assets.gates.com/content/dam/gates/home/resources/resource-library/application-specs/gatescorporationbeltidchart.pdf]]
+[[https://www.biedlers-belts.com/gates-b28-belt.html]]
+[[https://www.biedlers-belts.com/single-v-belts/tri-power-notched-belt/bx-section/gates-bx28-belt.html]]