Differences

This shows you the differences between two versions of the page.

--- tool:lightobject_q800_water_chiller [2022/07/19 21:39] – created majicj
+++ tool:lightobject_q800_water_chiller [2022/07/19 22:40] (current) – majicj
@@ Line 1: / Line 1: @@
 ====== Lightobject Q800 Water Chiller ======
+VHS has purchased a [[https://lightobject.com/q800-water-chiller/|Lightobject Q800 Water Chiller]] to cool its laser tube.
+{{:tool:laser_cutter:chiller:loq800chiller_10.jpeg?400|}}
-Add Description
+LightObject’s Q800 Water Chiller offers exceptional performance, consistency, and reliability thanks to the high quality JLD612 PID-controller and our two-stage compressor system. This unit features an oversized capacitor which alleviates issues with circuit over-drawing during starting amperage that are common in other chillers.
-Web Link
-Photos
-Instructions etc
+The JD612 PID controller is capable of achieving a 0.1°C setpoint resolution and features a dual-display that shows both the setpoint and the current system temperature.  The compressor utilizes an environmentally-friendly refrigerant, R134a.
+The internal pump is rated for 10 meters of lift at a flowrate of 19 Liters/min to ensure adequate circulation of coolant regardless of chiller placement. The unit is suitable for ambient conditions up to 35°C, with a selectable cooling range of 18°C - 30°C.
+**Highlight**
+  * 20% cooling performance improvement
+  * Integrated temperature controller installed
+  * Better temperature control +/- 0.5'C
+  * Ideal for a machine with a single 80W~130W tube
+**Features**
+  * Environment-friendly refrigerant R134a
+  * PID temperature controller
+  * Compact design
+  * Over-heat temperature and water flow alert
+**Specification**
+  * Cooling Power: 800W
+  * BTU: 2,729Btu/h
+  * Power consumption: 370W
+  * Input power: AC 110V, 60Hz
+  * Full power current: 3.5A
+  * Refrigerant: R134A
+  * Pump power: 30W
+  * Pump lift (cut off) : 10m (33ft)
+  * Pump flow rate: 19L/min, 300GPH
+  * Suggested Inlet/Outlet tubing: 8mmx12mm Silicone Tubing
+  * Silicone tubing included: No
+  * Ambient Temp: ≤35°C (95°F)
+  * Chilled Water Temp. 18~30°C(64.4~86°F)
+  * Water tank capacity: 7L
+  * Weight: 24kg (52lb)
+  * Dimensions: W405×D470×H480mm (16" x 18.5" x 19") note: depth measured from blue cap
+  * Warranty - 12-month limited warranty from date of purchase.
+  * Purchased July 14th 2022, Order No 2158754 by Arrgh (Alex C) $595US Total incl shipping.
+**Photos**
+{{:tool:laser_cutter:chiller:loq800chiller_1.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_3.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_2.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_4.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_5.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_6.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_7.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_8.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chiller_9.jpeg?400|}}
+**Instructions**
+{{:tool:laser_cutter:chiller:loq800chillerinst_1.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chillerinst_2.jpeg?400|}}
+{{:tool:laser_cutter:chiller:loq800chillerinst_3.jpeg?400|}}