Differences

This shows you the differences between two versions of the page.

--- tool:laser_cutter:settings [2019/07/14 02:29] – add cork under provisional approval jdmc
+++ tool:laser_cutter:settings [2021/10/18 16:43] – add Cermark & Laserbond jon_grieman
@@ Line 17: / Line 17: @@
 ^ Material					^ Mode		^ Speed	^ Power	^ Corner Power	^ Passes	^ Notes ^
 | Plywood 1/4" Birch				| Cut		| 40	| 50	| 45		| 2		| From Home Depot ~$50 for 8'x4' |
-| Plywood 1/8" Birch				| Cut		| 16	| 55	| 55		| 1		| From Windsor Plywood ~$17 for 5'x5' |
+| Plywood 1/8" Birch				| Cut		| 24	| 55	| 55		| 1		| From Windsor Plywood ~$17 for 5'x5' |
-| Plywood 1/8" Maple| Cut		| 16	| 55	| 55		| 1		| |
+| Plywood 1/8" Maple| Cut		| 24	| 55	| 55		| 1		| |
 | Plywood 1/8" Birch				| Etch		| 80	| 28	| 28		| 1		| Deep etching, excellent for countersinking screw holes |
 | Plywood 4.2mm FSC Virola			| Cut		| 40	| 50	| 45		| 2		| From Home Depot ~$20 for 8'x4' SKU 1000-125618 (Tom)|
@@ Line 39: / Line 39: @@
 ^ Material					^ Mode		^ Speed	^ Power	^ Corner Power	^ Passes	^ Notes ^
 | Leather (Vegetable Tanned)					| Cut		| 	| 	| 		| 1		|  |
-| Felt				| Cut		| 	| 	| 		| 		|    |
+| Felt				| Cut		| 100	| 25	| 		| 1		|    |
 ===== Other =====
@@ Line 45: / Line 45: @@
 | Application Tape | | | | | | Small amounts used for masking |
 | Painters Tape | | | | | | Small amounts used for masking |
+| Laserbond100 Marking Spray | | | | | | Aerosol propellants are nasty - ensure the coating has fully dried before lasering |
+| Cermark 6000 Marking Spray | | | | | | Aerosol propellants are nasty - ensure the coating has fully dried before lasering |
 ===== Etch Only =====