Vancouver Hack Space

User Tools

Site Tools

You are here: start » tool » laser_cutter » settings
tool:laser_cutter:settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
tool:laser_cutter:settings [2022/09/21 05:52] – david_neufeldtool:laser_cutter:settings [2022/09/27 01:05] (current) – david_neufeld
Line 28: Line 28:
 | Acrylic - 1/4" | Cut | 10 | 55 | 55 | 1 |    | | Acrylic - 1/4" | Cut | 10 | 55 | 55 | 1 |    |
 | Acrylic - 1/16" | Cut | 20 | 60 | 60 | 1 |    | | Acrylic - 1/16" | Cut | 20 | 60 | 60 | 1 |    |
-| Acrylic - 4.5mm   | Cut   | 25   | 50   | 50   | 1  |+| Acrylic - 4.5mm   | Cut   | 23   | 50   | 50   | 1  |
 | Polypropylene (0.75mm) | Cut | 30 | 50 | 45 | 1 | From Yoko-yaya, ideal for painting stencils (John) | | Polypropylene (0.75mm) | Cut | 30 | 50 | 45 | 1 | From Yoko-yaya, ideal for painting stencils (John) |
 | EVA Foam (very thin, < 4mm) | Cut | | | | 1 | Michaels | | EVA Foam (very thin, < 4mm) | Cut | | | | 1 | Michaels |
tool/laser_cutter/settings.txt · Last modified: 2022/09/27 01:05 by david_neufeld
Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki