User Tools

Site Tools


tool:form1sla

This is an old revision of the document!


Form 1 SLA Resin 3D Printer

Status Work in Progess
Training Mandatory
Hackable Hardware: No / Software: maybe, see below
Usage Restrictions Members Only
Owner VHS
If it Breaks Put a “broken” sign on machine, post to Talk with details.
Loan Status Generously donated to VHS
Arrival Date Aug 2018
Location Workbench (designated SLA printing station)
Champion See Compendium of Champions

Information:

Use only Novus 1 cleaner to clean the acrylic surfaces of the tank and the orange hood of the printer.
Do NOT use isopropyl alcohol on acrylic

General info

Resources

read through the support articles on FormLabs website non-official wiki: http://form1printer.pbworks.com

OpenFL

Set Up a Print

you will need

Cleaning Up

how to clean the tank

Semi official instruction from FormLabs staff

1. Use the scraper to scrape out as much resin as possible.
2. Use the squirt bottle to squirt IPA into the tank while holding the tank upside down so the IPA can drip out. You don’t want the liquid pooling in the resin tank as it could seep under the silicone, destroying the tank. You can use the scraper to wipe the silicone.
3. Place the resin tank upside down on a paper towel to let the IPA drip out and dry.
Clean Up After a Successful Print
Clean Up After a Failed Print

Maintenance

tank maintainance
tool/form1sla.1534916638.txt.gz · Last modified: 2018/08/22 05:43 by mimi_x

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki