User Tools

Site Tools


tool:drill_press

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
tool:drill_press [2013/11/21 19:03] – created jarretttool:drill_press [2024/01/29 21:39] (current) tyisi
Line 1: Line 1:
 +{{:tool:dsc_1987.jpg?300|}}
 +
 ====== Information: ====== ====== Information: ======
   * **owner** = Vancouver Hack Space   * **owner** = Vancouver Hack Space
 +  * **donated by** Paul Gill; contact him if/when this tool is to be retired.
   * **user certification required** = Tool certification doesn't exist yet.   * **user certification required** = Tool certification doesn't exist yet.
   * **hackable** = No (See tips below)   * **hackable** = No (See tips below)
-  * **model** = Mastercraft+  * **model** = King Canada
   * **serial #** =   * **serial #** =
-  * **arrived** = June 2010+  * **arrived** = August 2015
   * **does it work?** = Works   * **does it work?** = Works
-  * **if it breaks** = Unplug machine, put a "broken" sign on machine, contact John.+  * **if it breaks** = Unplug machine, put a "broken" sign on machine, post on Talk.
   * **contact** = John Craver   * **contact** = John Craver
-  * **where** = Workbench+  * **where** = Machine shop
   * **value** = $100   * **value** = $100
  
Line 31: Line 34:
 __Description:__ __Description:__
  
-The drill press comes in a floor or bench-mounted model. It has a motor driven head that has a chuck that accepts bits or cutters. It also has an adjustable table on which the work is mounted. It is operated by pulling a rotary lever that lowers the drill bit into the material. To avoid accidents, the following operational safety rules must be observed by everyone working on the Vancouver Hack Space drill press. Failure to follow the safety rules may result in a loss of shop privileges.+The drill press comes in a floor standing model. It has a motor driven head that has a chuck that accepts bits or cutters. It also has an adjustable table on which the work is mounted. It is operated by pulling a rotary lever that lowers the drill bit into the material. To avoid accidents, the following operational safety rules must be observed by everyone working on the Vancouver Hack Space drill press. Failure to follow the safety rules may result in a loss of shop privileges.
  
 __Start With A Risk Assessment To Ensure A Safe Work Area:__ __Start With A Risk Assessment To Ensure A Safe Work Area:__
Line 63: Line 66:
   - Always clean the drill press table and work area upon completion of the drilling task. Do not use your hands or blow the drill shavings, use a chip brush.   - Always clean the drill press table and work area upon completion of the drilling task. Do not use your hands or blow the drill shavings, use a chip brush.
   - When drilling into metal use cutting oil and apply moderate downward pressure. If you generate excessive smoke from the cutting oil you are either applying too much pressure or your bit is dull. Rags or chip brushes saturated with cutting oil should be disposed of in a fire can or outside in the dumpster. Never place oil saturated material in the interior garbage cans within the space!   - When drilling into metal use cutting oil and apply moderate downward pressure. If you generate excessive smoke from the cutting oil you are either applying too much pressure or your bit is dull. Rags or chip brushes saturated with cutting oil should be disposed of in a fire can or outside in the dumpster. Never place oil saturated material in the interior garbage cans within the space!
 +
 +===== Speeds =====
 +
 +RPMs can be determined easily by using this {{:tool:cutting-speed-nomogram.png?linkonly|cutting speed nomogram}}, just substitute the drill size for the workpiece diameter. The {{:tool:lathe-cutting-speed.png?linkonly|original cutting speed nomogram}} came from Ian at the BCSME.
  
tool/drill_press.1385060635.txt.gz · Last modified: 2015/12/12 14:31 (external edit)

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki