tool:7-1_4-inch_circular_saw
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
— | tool:7-1_4-inch_circular_saw [2020/05/25 21:36] (current) – created gabedev | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== RYOBI 13-Amp 7-1/4-inch Circular Saw ====== | ||
+ | {{ : | ||
+ | |||
+ | Circular saw for cutting wood and //not// metal | ||
+ | |||
+ | ^ Status | ||
+ | ^ Training | ||
+ | ^ Hackable | ||
+ | ^ Usage Restrictions | Members Only | | ||
+ | ^ Owner | Gabriel de Vries | | ||
+ | ^ If it Breaks | ||
+ | ^ Loan Status | ||
+ | ^ Arrival Date | January 2020 | | ||
+ | ^ Location | ||
+ | ^ Value | $ | | ||
+ | ^ Champion | ||
+ | |||
+ | ===== Safety ===== | ||
+ | **Do:** | ||
+ | |||
+ | * Wear personal protective equipment, including safety glasses or goggles, faceshields, | ||
+ | * Ensure all safety guards are in good working order before starting work. | ||
+ | * Ensure the saw’s blade is sharp. Sharp blades are safer and work better. | ||
+ | * Keep cords away from the cutting area. | ||
+ | * Know that circular saws are designed to be used by right-handed operators. If you are left-handed, | ||
+ | * Check to be sure the retracting lower blade guard returns to its starting position before laying down the saw. | ||
+ | * De-energize your saw before changing or adjusting its blade. | ||
+ | * Keep the saw clean. | ||
+ | * Maintain good footing when using the saw. | ||
+ | |||
+ | **Don’t: | ||
+ | * Put your hand under the saw’s guard. | ||
+ | * Operate a vibrating saw. | ||
+ | * Force the saw when cutting. | ||
+ | * Hold or carry the saw with your finger on the trigger switch. | ||
+ | * Use the saw without first checking for materials, such as a nail or screw, that may cause an obstruction. | ||
+ | |||
+ | ===== Specifications ===== | ||
+ | |||
+ | * 13 amp motor for cutting various types of lumber | ||
+ | * Bevel adjustment from 0° to 51.5° with positive stops at 45° and 51.5° | ||
+ | * Speed: 5000 r/minute (RPM) | ||
+ | * Depth of cut: 2 7/16 inches at 0°; 1 7/8 inches at 45° 1 11/16 inches at 51.5° | ||
+ | * Air diverter and dust exhaust keep the line of cut clear while directing particles away from the user | ||
+ | * On-board wrench storage for added convenience | ||
+ | * Spindle blade lock for easy, keyless, blade changes | ||
+ | * Includes: 7-1/4 -inch Blade and Blade Wrench | ||
+ | |||
+ | ===== Tutorial ===== | ||
+ | |||
+ | [[https:// |
tool/7-1_4-inch_circular_saw.txt · Last modified: 2020/05/25 21:36 by gabedev