Circular saw for cutting wood and not metal

Do:

• Wear personal protective equipment, including safety glasses or goggles, faceshields, and hearing protection.
• Ensure all safety guards are in good working order before starting work.
• Ensure the saw’s blade is sharp. Sharp blades are safer and work better.
• Keep cords away from the cutting area.
• Know that circular saws are designed to be used by right-handed operators. If you are left-handed, the saw will require more care to use safely.
• Check to be sure the retracting lower blade guard returns to its starting position before laying down the saw.
• De-energize your saw before changing or adjusting its blade.
• Keep the saw clean.
• Maintain good footing when using the saw.

Don’t:

• Put your hand under the saw’s guard.
• Operate a vibrating saw.
• Force the saw when cutting.
• Hold or carry the saw with your finger on the trigger switch.
• Use the saw without first checking for materials, such as a nail or screw, that may cause an obstruction.

• 13 amp motor for cutting various types of lumber
• Bevel adjustment from 0° to 51.5° with positive stops at 45° and 51.5°
• Speed: 5000 r/minute (RPM)
• Depth of cut: 2 7/16 inches at 0°; 1 7/8 inches at 45° 1 11/16 inches at 51.5°
• Air diverter and dust exhaust keep the line of cut clear while directing particles away from the user
• On-board wrench storage for added convenience
• Spindle blade lock for easy, keyless, blade changes
• Includes: 7-1/4 -inch Blade and Blade Wrench

Here let home depot teach you