tool:18.0v_cordless_drill
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
Previous revision | |||
— | tool:18.0v_cordless_drill [2015/12/12 14:31] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== Information ====== | ||
+ | * **owner** = Vancouver Hack Space | ||
+ | * **user certification required** = None Required | ||
+ | * **hackable** = No (See tips below) | ||
+ | * **model** = Mastercraft | ||
+ | * **serial #** = | ||
+ | * **arrived** = November 2011 | ||
+ | * **does it work?** = Works | ||
+ | * **if it breaks** = Put a & | ||
+ | * **contact** = John Craver | ||
+ | * **where** = On the workbench | ||
+ | * **value** = $80 | ||
+ | |||
+ | ====== Safety at a Glance ====== | ||
+ | |||
+ | Mandatory: | ||
+ | * Safety Glasses | ||
+ | * Clamps or Bench Vise | ||
+ | |||
+ | Optional: | ||
+ | * Face Shield | ||
+ | * Hearing Protection | ||
+ | |||
+ | Prohibited: | ||
+ | * Gloves (NEVER use gloves near rotating machinery!) | ||
+ | * Jewellery, Long Hair (tie back), and loose fitting clothing. | ||
+ | |||
+ | ====== Safe Operation ====== | ||
+ | |||
+ | __Description: | ||
+ | |||
+ | The cordless drill is convenient for drilling holes in locations that would be difficult for a corded drill to reach. | ||
+ | |||
+ | This particular drill is powered by a proprietary 18.0V Nickel-Cadmium battery pack, which makes this drill more powerful than many other kinds of cordless drills, but also heavier as well. The drill has a spare battery pack which should be left plugged into the charger on the workbench so it stays fully charged and ready for use for when the drill' | ||
+ | |||
+ | To avoid accidents, the following operational safety rules must be observed by everyone using the Vancouver Hack Space cordless drill. Failure to follow the safety rules may result in a loss of shop privileges. | ||
+ | |||
+ | __Start With A Risk Assessment To Ensure A Safe Work Area:__ | ||
+ | - A two foot perimeter around the drill should be kept clear of people, debris and sawdust that impair traction or footing to avoid slips and falls. | ||
+ | - Safety glasses or a face shield must be worn. Hearing protection is recommended when using the cordless drill for a long period of time. | ||
+ | - Remove loose fitting clothing, jewelry, and tie back long hair. | ||
+ | - Give the work your undivided attention. | ||
+ | - Do not wear gloves or anything that would allow a hand, fingers or clothing to be wrapped around the revolving bit. | ||
+ | |||
+ | __Operational Safety Rules:__ | ||
+ | - Approach your work at VHS and with the cordless drill with a safe attitude! | ||
+ | - Make sure the size of the bit is equal to or less than the capacity of the drill (drill bits should have a shank size of 3/ | ||
+ | - Do not exceed the recommended speeds for the type and size of drill bit being used or composition of the stock being drilled. | ||
+ | - Center punch the drill-hole location into the stock. | ||
+ | - Use a clamp or vise to securely fasten the stock to the drill press table. Never attempt to handhold stock less than 3’ long while drilling. | ||
tool/18.0v_cordless_drill.txt · Last modified: 2015/12/12 14:31 by 127.0.0.1