tool:redsail_cm1080_laser_cutter
This is an old revision of the document!
Table of Contents
Laser Cutter
Summary description of the tool and perhaps some misc notes about it's existence!
| Status | NOT WORKING as of 2013-11-20 |
|---|---|
| Training | YES (see below) |
| Hackable | NO |
| Usage Restrictions | Members Only |
| Owner | Vancouver Hack Space |
| If it Breaks | Turn off main power, leave water cooler running for 5 minutes and then shut off the Master Power and unplug. Put a BROKEN sign on machine. Notify Members list and Laser Cutter Committee immediately. |
| Arrival Date | March 30, 2012 |
| Location | Laser Room |
| Value | $3500 + ~$1000 to get it here and set up |
| Champion | See Compendium of Champions |
Laser Cutter User Certification
Anyone who wishes to use the laser cutter must be both a VHS member, and have completed a laser cutter training class (class dates are announced on the members' mailing list)
If you are planning to take a class, please first read through the operation manual. http://vancouver.hackspace.ca/doku.php?id=tool:laser_cutter:operation_manual
Specifications
- Work area size: 1000mm x 800mm
- Power: 80W
FURTHER INFORMATION
Maintenance Log
| Note | Date | Who |
|---|---|---|
| Wiki entry created | Nov 20, 2013 | Thomas L. |
tool/redsail_cm1080_laser_cutter.1385062170.txt.gz · Last modified: 2015/12/12 14:31 (external edit)