Z-Turn

The Z-Turn IO Cape does not use the raspberry PI CSI ribbon cable interface.

Parallela porcupine uses SLW15S-1C7LF which is a 15pin 1.00mm pitch, 0.30mm - 0.33mm thinkness PCB connector.

MY-CAM011B connects to the Z-Turn IO Cape through 30-pin FPC connector.

The 30-pin FPC camera interface is defined here. I think an interface board is required to connect to a raspberry PI camera.

If you have a question for MYIR, I suggest you send TO: support@myirtech.com, sales@myirtech.com

Subject: connecting raspberry pi camera to z-turn
I would like to use a raspberry pi camera with the z-turn IO cape. 

I would like to purchase a connector between the z-turn IO Cape J2 interface and the raspberry pi csi-2 interface. 
---
Subject: Re: connecting raspberry pi camera to z-turn
Dear Timothy,

Thanks for your mail. But I'm sorry we do not have such connectors.
Please find the Z-turn IO Cape schematic enclosed

Z-turn IO Cape schematic