Hi Tim,
Following are my notes from the Saturday (March 25th, 2017) class:

Thanks,
Rahul

Install COPRTHR SDK
PARALLELLA PAGE:
https://www.parallella.org/2013/03/08/introduction-to-parallella-and-opencl/ 
http://www.browndeertechnology.com/coprthr_download.htm
GITHUB PAGE:
https://github.com/browndeer/coprthr (Procedure Explained)

sudo apt-get install gmake

apt-get install freebsd-glue

sudo aptitude 
install bison

sudo apt-get install flex

gitclone libelf
Installation is straightforward - the package is autoconf'ed. Just do
cd libelf-0.8.13; 
./configure; 
make; 
(sudo) make install''. Header files
will be installed in .../include/libelf/.

libconfig
./configure
make
sudo make install

sudo aptitude install autogen
The following NEW packages will be installed:
autogen autogen-doc{a} libopts25{a} libopts25-dev{a} 
0 packages upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,714 kB of archives. After unpacking 5,179 kB will be used.
Do you want to continue? [Y/n/?] Y
autogen
./configure && make

DOWNLOAD libevent-2.0.18/
OR
GIT CLONE libevent-2.0.21-stable
{ls -al}
{head autogen.sh}
bash autogen.sh
ls -alrt
date
./configure
ls -lart
make
sudo make install
make verify

cd coprthr
./configure
make
ls -alrt
make clean
sudo make install