{{:tool:heat_treat_oven.jpg?300|}}

====== Information: ======
  * **owner** = Vancouver Hack Space
  * **no certification required** = Tool certification doesn't exist yet.
  * **hackable** = No (See tips below)
  * **model** = Paragon KM 14T
  * **serial #** =
  * **arrived** = 2021
  * **does it work?** = Works
  * **if it breaks** = Unplug machine, put a broken sign on machine, post on Talk.
  * **contact** = Machine Shop/Welding Shop
  * **where** = Machine shop
  * **value** = $$$$

[[https://paragonweb.com/home/5c212jmb00/#|This Link points to Paragon KM14T oven]]

[[https://www.youtube.com/watch?v=trHHWl6ncr4|A video review of a similar Paragon oven]]

====== Safety at a Glance ======
__Hot:__
  * If it wasn't obvious, ovens make things hot.  This oven is extra spicy.  Follow all safety procedures for really really hot things.
  * Know where you are going to put hot things and clear those areas and the paths between them before things are hot.
  * Do not leave the space while things (material, oven, tools, etc) are still hot.
  * Fire watch for 30 minutes after everything is cool.
__Time:__
  * Any operation with this oven takes time, plan accordingly.
  * Example Timing Info: "It took 55 minutes to get to 1550 including a 40 drop when I peeked to take a pic at about 1400.."
__Buddy Up:__
  * Consider working with a buddy to help with doors and hot things.
  * If working with a buddy is not viable, consider working when others are within earshot.


{{:tool:img_thermal_1652049922585.jpg?direct&400|}}
{{:tool:img_thermal_1652049897487.jpg?direct&400|}}
{{:tool:img_thermal_1652049986140.jpg?direct&400|}}

===== Controls =====

The oven has a programmable controller.  Manual attached here {{:tool:im204-sentry12key-cfrh-nov2018.pdf}}