====== Tevo Tarantula ======

{{:tool:loaners:3d-printers:tarantula.jpg?400|}}

**3D printer that members can take home to do longer prints**



^ Make & Model       | Tevo Tarantula  |
^ User Manual        | see "Notes on Use" below |
^ Status             | Working as of May 2021                           |
^ Training           | Recommended                                       |
^ Hackable           | No                                                              |
^ Usage Restrictions | Members Only                     |
^ Owner              | On loan to VHS from Yeungx                                          |
^ If it Breaks       | Post to 3D Printer slack channel (or fix)   |
^ Loan Status        | Permanent                  |
^ Arrival Date       | May 2021                                                                   |
^ Location           | Front office if not out on loan                                      |
^ Value              | Priceless                                                                     |
^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
^ Sign Up Sheet      | [[https://docs.google.com/spreadsheets/d/1WSWk7Ehhj_nHH1jNUHSu8QdANAIbG9_aypfSn2RI6Bs/edit#gid=311299920 | Sign Up ]] |

===== Specifications =====
^ Build Volume        | 200 x 200 x 400 mm |
^ Filament Diameter   | 1.75 mm |
^ Layer Resolution    | 100-300 microns (0.1-0.3 mm) |
^ Material            | PLA, ABS,PETG|
^ Nozzle Diameter     | 0.4mm |
^ Technology          | Fused Filament Fabrication (FFF) |

===== Notes on Use =====

[[https://docs.google.com/document/d/1Wu9bOqJV5iCY7KGPxqc-xvKRN9xkmI1RM5BSEvyff2I | Notes on Use]]

===== Software =====
^ File Type           | STL,OBJ |
^ Os Compatibiltiy    | Windows, Mac |
^ Software            | [[https://slic3r.org/download/ | Slic3r]] |
^                     | [[https://ultimaker.com/software/ultimaker-cura | Cura]] |


^ Note               ^ Date         ^ Who       ^
| Wiki entry created | May 24, 2021 | Steve Roy |