====== Lightobject Q800 Water Chiller ====== VHS has purchased a [[https://lightobject.com/q800-water-chiller/|Lightobject Q800 Water Chiller]] to cool its laser tube. {{:tool:laser_cutter:chiller:loq800chiller_10.jpeg?400|}} LightObject’s Q800 Water Chiller offers exceptional performance, consistency, and reliability thanks to the high quality JLD612 PID-controller and our two-stage compressor system. This unit features an oversized capacitor which alleviates issues with circuit over-drawing during starting amperage that are common in other chillers. The JD612 PID controller is capable of achieving a 0.1°C setpoint resolution and features a dual-display that shows both the setpoint and the current system temperature. The compressor utilizes an environmentally-friendly refrigerant, R134a. The internal pump is rated for 10 meters of lift at a flowrate of 19 Liters/min to ensure adequate circulation of coolant regardless of chiller placement. The unit is suitable for ambient conditions up to 35°C, with a selectable cooling range of 18°C - 30°C. **Highlight** * 20% cooling performance improvement * Integrated temperature controller installed * Better temperature control +/- 0.5'C * Ideal for a machine with a single 80W~130W tube **Features** * Environment-friendly refrigerant R134a * PID temperature controller * Compact design * Over-heat temperature and water flow alert **Specification** * Cooling Power: 800W * BTU: 2,729Btu/h * Power consumption: 370W * Input power: AC 110V, 60Hz * Full power current: 3.5A * Refrigerant: R134A * Pump power: 30W * Pump lift (cut off) : 10m (33ft) * Pump flow rate: 19L/min, 300GPH * Suggested Inlet/Outlet tubing: 8mmx12mm Silicone Tubing * Silicone tubing included: No * Ambient Temp: ≤35°C (95°F) * Chilled Water Temp. 18~30°C(64.4~86°F) * Water tank capacity: 7L * Weight: 24kg (52lb) * Dimensions: W405×D470×H480mm (16" x 18.5" x 19") note: depth measured from blue cap * Warranty - 12-month limited warranty from date of purchase. * Purchased July 14th 2022, Order No 2158754 by Arrgh (Alex C) $595US Total incl shipping. **Photos** {{:tool:laser_cutter:chiller:loq800chiller_1.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_3.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_2.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_4.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_5.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_6.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_7.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_8.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chiller_9.jpeg?400|}} **Instructions** {{:tool:laser_cutter:chiller:loq800chillerinst_1.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chillerinst_2.jpeg?400|}} {{:tool:laser_cutter:chiller:loq800chillerinst_3.jpeg?400|}}