Links to Multitouch Info:

  * [[http://www.multitouch.nl|Multitouch.nl]]
  * [[http://nuigroup.org]]

Plan:

Create an FTIR table that is 4:3 ratio.  Ideally, it would be a large (1.6 m by 1.2 m) screen.

Bill of Materials:
  * OSFRAM IR LEDs (Approx 80 LEDs) - Note: The short end of these is Positive, unlike every other LED on the planet
  * A frame - Need someone good with woodworking to build this.  Should be vertical
  * Sorta-Clear 40 - Can be bought in Delta from a supplier.  [[http://www.faireyco.com/|Fairey & Co. Ltd]]
  * Tracing Paper - (To project the image)
  * IR Camera - (Can be made with a Webcam + Chunks of Developed Film.  Prefer higher resolution for a larger screen.  1024x768 would be good)
  * Projector - 800 x 600 would be fine, but 1024 x 768 would be better.
  * A large 1.6m by 1.2m Sheet of Acrylic