==== Z-Turn ==== The Z-Turn IO Cape does not use the raspberry PI CSI ribbon cable interface. Parallela porcupine uses SLW15S-1C7LF which is a 15pin 1.00mm pitch, 0.30mm - 0.33mm thinkness PCB connector. [[http://www.myirtech.com/list.asp?id=534|MY-CAM011B]] connects to the Z-Turn IO Cape through 30-pin FPC connector. The 30-pin FPC camera interface is defined here. I think an interface board is required to connect to a raspberry PI camera. * http://www.myirtech.com/download/Zynq7000/Z-TURN_SCH_V4_20150326.pdf * http://www.myirtech.com/download/Zynq7000/A_Hello_World_tutorial_for_Z-turn_Board.pdf * http://www.myirtech.com/download/Zynq7000/Z-turn_Board_Quick_Start_Guide.pdf * http://www.myirtech.com/download/Zynq7000/Z-turnBoard.pdf * http://www.myirtech.com/download/Zynq7000/Z-turn-DIFF-IO-length.pdf * http://www.myirtech.com/download/Zynq7000/Zynq-7000-Overview.pdf If you have a question for MYIR, I suggest you send TO: support@myirtech.com, sales@myirtech.com Subject: connecting raspberry pi camera to z-turn I would like to use a raspberry pi camera with the z-turn IO cape. I would like to purchase a connector between the z-turn IO Cape J2 interface and the raspberry pi csi-2 interface. --- Subject: Re: connecting raspberry pi camera to z-turn Dear Timothy, Thanks for your mail. But I'm sorry we do not have such connectors. Please find the Z-turn IO Cape schematic enclosed [[https://vanhack.ca/lib/exe/fetch.php?media=hacks:fpga:z-turn_io_cape-sch-20150518.pdf|Z-turn IO Cape schematic]]