Differences

This shows you the differences between two versions of the page.

--- tool:sewing_machines [2021/10/25 05:21] – elizabot
+++ tool:sewing_machines [2024/09/22 20:56] (current) – elizabot
@@ Line 7: / Line 7: @@
 **Sewing Machine FAQ:**
+  * // **Important note**// Please make sure that you have the needle all the way up before you remove the fabric. If the fabric doesn't pull out easily, move the handwheel a bit until it does.
+  * // **Important note**// Not all feet work on all sewing machines!
   * //**My stitches are uneven / keep skipping**// - Check what kind of needle is in the machine. [[sewing_needles|Different needles are for different fabric.]] If your needle is [[sewing_needles#Ballpoint_Needle|dull**]], crooked or snagging your fabric, change it
-  * //**It keeps jamming from the bottom**// - [[tool:sewing_needles#Types_of_bobbins|Are you using the correct bobbin for the machine?]] Check that your bobbin is wound correctly and inserted in the right direction
+  * //**It keeps jamming from the bottom**// - [[tool:sewing_needles#Types_of_bobbins|Are you using the correct bobbin for the machine?]] Check that your bobbin is wound correctly and inserted in the right direction. Note: the Janome and the Brother should only be used with plastic bobbins, not metal.
-  * //**I'm sewing but all my stitches fall out**// - Did you run out of bobbin thread? Wind a new bobbin. Did you leave the presserfoot up? You can only sew with it in the down position first.
+  * //**I'm sewing but all my stitches fall out**// - Did you run out of bobbin thread? Wind a new bobbin. Did you leave the presser foot up? You can only sew with it in the down position first.
   * //**Threads are too loose or pulling tight**// - Check that your machine is threaded correctly. Check the tension dials and stitch length.
-  * //**I'm sewing but it won't go anywhere**// - Check your stitch length and style, are you on a stretch stitch or fancy? Are you trying to sew with the presserfoot up?
+  * //**I'm sewing but it won't go anywhere**// - Check your stitch length and style, are you on a stretch stitch or fancy? Are you trying to sew with the presser foot up?
 ===== Brother Innov-ís 80 =====
@@ Line 18: / Line 20: @@
  {{ :tool:brotherinnovis80.jpg?direct&400|}}
-^ Status             | Working as of October 24 2021                           |
+^ Status             | Working (May 2023)                        |
-^ Training           | Recommended                                     |
+^ Training           | Not needed, but ask Liz if you want assistance|
 ^ Hackable           | NO                                                              |
 ^ Usage Restrictions | Anyone                     |
 ^ Owner              | VHS                                        |
 ^ If it Breaks       | It's probably not truly broken, you just jammed the thread or broke a needle. 1) replace your needle and re-thread the machine 2) If that doesnt work, put a sticky note on it and contact a champion   |
-^ Loan Status        | Unknown                |
+^ Loan Status        | Donated by rsim - contact if removal required                |
-^ Location           | On the sewing table                             |
+^ Location           | On or under the sewing table                             |
 ^ Value              | $$                                                                     |
 ^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
@@ Line 38: / Line 40: @@
 {{ :tool:janome6019.jpg?direct&400|}}
-^ Status             | Bobbin thread was not working as of May 2021                         |
+^ Status             | Repaired by Euro-Tech in May 2023, there's a 1-year warranty.               |
-^ Training           | Recommended                                     |
+^ Training           | Not needed, but ask Liz if you want assistance |
 ^ Hackable           | NO                                                              |
 ^ Usage Restrictions | Anyone                     |
@@ Line 45: / Line 47: @@
 ^ If it Breaks       | It's probably not truly broken, you just jammed the thread or broke a needle. 1) replace your needle and re-thread the machine 2) If that doesnt work, put a sticky note on it and contact a champion   |
 ^ Loan Status        | Unknown    (has a label saying on loan from Miststlkr)             |
-^ Location           | Under the sewing table                              |
+^ Location           | On or under the sewing table                              |
 ^ Value              | $$                                                                     |
 ^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
@@ Line 52: / Line 54: @@
   * [[http://janome.com/siteassets/support/manuals/retired/other-models/inst-book-6019qc.pdf|Instruction Manual PDF]]
   * [[https://www.youtube.com/watch?v=7W2WJhoMtJI]]
+  * Repair receipt with warranty: {{:tool:janome_repair_receipt_with_warranty.jpeg?200|}}
-===== Kenmore Ultrastitch 12 =====
-{{ :tool:kenmoreus12.jpg?direct&400|}}
-^ Status             | Status unknown (needs testing)                      |
-^ Training           | Recommended                                     |
-^ Hackable           | NO                                                              |
-^ Usage Restrictions | Anyone                     |
-^ Owner              | VHS                                        |
-^ If it Breaks       | It's probably not truly broken, you just jammed the thread or broke a needle. 1) replace your needle and re-thread the machine 2) If that doesnt work, put a sticky note on it and contact a champion   |
-^ Loan Status        | Unknown  (has a label saying loaned by Davonna)              |
-^ Location           | Under the sewing table                                     |
-^ Value              | $                                                                     |
-^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
 ===== Kenmore Ultrastitch 6 =====
-{{ :tool:kenmoreus12.jpg?direct&400|}}
+{{ :tool:KenmoreUltrastitch6.jpg?direct&400|}}
-^ Status             | Operational & tension set October 2021                      |
+^ Status             | Operational as of January 2023                     |
 ^ Training           | Recommended                                     |
 ^ Hackable           | NO                                                              |
@@ Line 79: / Line 67: @@
 ^ If it Breaks       | It's probably not truly broken, you just jammed the thread or broke a needle. 1) replace your needle and re-thread the machine 2) If that doesnt work, put a sticky note on it and contact a champion   |
 ^ Loan Status        | Unknown                  |
-^ Location           | Under the sewing table                                  |
+^ Location           | On or under the sewing table                              |
 ^ Value              | $                                                                     |
 ^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
-===== Singer 656G =====
-  * Type: Slant Shank Sewing Machine
-  * Manual: Not found, but possibly hard copy available at the space
-  {{ :tool:singer658g.jpg?direct&400|}}
-^ Status             | Working as of October 2021                         |
-^ Training           | Recommended                                     |
-^ Hackable           | NO                                                              |
-^ Usage Restrictions | Anyone                     |
-^ Owner              | VHS                                        |
-^ If it Breaks       | It's probably not truly broken, you just jammed the thread or broke a needle. 1) replace your needle and re-thread the machine 2) If that doesnt work, put a sticky note on it and contact a champion   |
-^ Loan Status        | (Unknown, Owned, Permanent, Temporary, Semi-Permanent                  |
-^ Location           | On the sewing table.                        |
-^ Value              | $                                                                     |
-^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
-Videos about threading the "Singer Golden Panoramic 670G" apply to this machine.
-There's also a threading guide inside a panel on the left side of the machine.
@@ Line 106: / Line 75: @@
 {{ :tool:singerstylist478.jpg?direct&400|}}
-^ Status             | Broken (handwheel doesn't move the needle). (As of October 2021)              |
+^ Status             | Janet took this home to fix (May 2023)              |
 ^ Training           | Recommended                                     |
 ^ Hackable           | NO                                                              |
@@ Line 113: / Line 82: @@
 ^ If it Breaks       | It's probably not truly broken, you just jammed the thread or broke a needle. 1) replace your needle and re-thread the machine 2) If that doesnt work, put a sticky note on it and contact a champion   |
 ^ Loan Status        | (Unknown, Owned, Permanent, Temporary, Semi-Permanent                  |
-^ Location           | Blue rubbermaid bin under the desk beside crafting table                 |
+^ Location           | Under the sewing table                 |
 ^ Value              | $                                                                     |
 ^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
@@ Line 119: / Line 88: @@
 ====== VHS Sergers ======
-===== Kenmore 3/4 Differential Feed =====
+===== Janome MyLock 234D =====
-This is the main serger set up on the craft table. By default it is set at a 4-thread safety stitch for general purpose woven and stretch fabrics. Feel free to change thread cone colours, but for 3-thread edging, use the Janome located on the workbench.
+{{ :tool:janomemylock.jpg?direct&400|}}
-{{ :tool:kenmore34serger.jpg?direct&400|}}
+^ Status             | Operational as of January 2023                      |
-^ Status             | Unknown (needs testing)                           |
+^ Training           | We don't have any training for Sergers unfortunately, but you can ask Liz or Metal Janet to help you figure it out. |
-^ Training           | Recommended                                     |
 ^ Hackable           | NO                                                              |
 ^ Usage Restrictions | Anyone                     |
 ^ Owner              | VHS                                        |
 ^ If it Breaks       | Check your lower looper threads if they are threaded properly. Check needles. \\ [[tool:sewing_needles#Serger_Needles|DO NOT PUT SEWING MACHINE NEEDLEs IN THE SERGER]] \\ If that doesnt work, put a sticky note on it and contact a champion   |
-^ Loan Status        | (Unknown, Owned, Permanent, Temporary, Semi-Permanent                  |
+^ Loan Status        | Donated by Miststlkr - Contact for pickup                 |
-^ Location           | Main crafting table                                     |
+^ Location           | Desk beside main crafting table                                     |
 ^ Value              | $$                                                                     |
 ^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
-===== Janome MyLock 234D =====
+[[http://janome.com/siteassets/support/manuals/retired/serger/inst-book-234-en.pdf| Manual PDF]]
-VHS' other serger, this machine is by default set to a 3-thread overlock to finish edges but not sew pieces together. Feel free to change thread cone colour.
+====== VHS Embroidery Machine ======
-{{ :tool:janomemylock.jpg?direct&400|}}
+===== Brother PE 800  =====
+{{:tool:embroidery_machine_brother_pe800.jpg?400|}}
-^ Status             | Unknown (needs testing)                        |
+^ Status             | Operational as of September 2024          |
-^ Training           | Recommended                                     |
+^ Training           | Talk to Liz |
 ^ Hackable           | NO                                                              |
 ^ Usage Restrictions | Anyone                     |
 ^ Owner              | VHS                                        |
-^ If it Breaks       | Check your lower looper threads if they are threaded properly. Check needles. \\ [[tool:sewing_needles#Serger_Needles|DO NOT PUT SEWING MACHINE NEEDLEs IN THE SERGER]] \\ If that doesnt work, put a sticky note on it and contact a champion   |
+^ If it Breaks       | Put a sticky note on it and contact a champion |
-^ Loan Status        | Donated by Miststlkr - Contact for pickup                 |
+^ Loan Status        | This was a group buy by VHS members                |
-^ Location           | Desk beside main crafting table                                     |
+^ Location           | On the sewing table               |
-^ Value              | $$                                                                     |
+^ Value              | $$$                                                                     |
-^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]     |
+^ Champion           | See [[tool:compendium_of_champions#tools|Compendium of Champions]]  |
+There are spare needles and a USB drive inside the purple cover.
+{{ :tool:brother_pe800_manual.pdf |}}
+[[https://www.youtube.com/watch?v=DfpJXuBeEPM|Intro Video]]
-[[http://janome.com/siteassets/support/manuals/retired/serger/inst-book-234-en.pdf| Manual PDF]]
 ====== VHS Industrial Sewing Machines ======
-===== Reliable Sewing Machines 4000SW walking foot =====
+===== Reliable Sewing Machines RELSEW GC0618-1 =====
 The don't mess around & will sew darn near anything industrial machine. It will happily sew leather, canvas, denim, and other thick materials.
 For threading and other instructions see the detailed page on the [[tool:Relsew4000SW|Relsew 4000SW]]
-{{ :tool:4000sw_spec.png?direct&400|}}
+{{:tool:4000sw_spec.png?direct&400|}}
-^ Status             | Tuned up and working September 5 2021 |
+^ Status             | Out of Order as of September 2024 (bobbin case is broken, we are getting a new one) |
 ^ Training           | Recommended |
 ^ Hackable           | NO                                                              |
@@ Line 175: / Line 150: @@
 There is a threading guide on the wall behind the machine.
-[[https://cdn.shopify.com/s/files/1/1267/1415/files/4000SW_Manual_Nov26.pdf?6347539493848786786| Manual PDF]]
+[[https://vanhack.ca/lib/exe/fetch.php?media=relsew-industrial-sewing-machine-manual.pdf| Manual PDF]]
 Additional info from dbynoe: