tool:drill_press
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| tool:drill_press [2015/12/12 14:31] – external edit 127.0.0.1 | tool:drill_press [2024/01/29 21:39] (current) – tyisi | ||
|---|---|---|---|
| Line 3: | Line 3: | ||
| ====== Information: | ====== Information: | ||
| * **owner** = Vancouver Hack Space | * **owner** = Vancouver Hack Space | ||
| + | * **donated by** Paul Gill; contact him if/when this tool is to be retired. | ||
| * **user certification required** = Tool certification doesn' | * **user certification required** = Tool certification doesn' | ||
| * **hackable** = No (See tips below) | * **hackable** = No (See tips below) | ||
| Line 65: | Line 66: | ||
| - Always clean the drill press table and work area upon completion of the drilling task. Do not use your hands or blow the drill shavings, use a chip brush. | - Always clean the drill press table and work area upon completion of the drilling task. Do not use your hands or blow the drill shavings, use a chip brush. | ||
| - When drilling into metal use cutting oil and apply moderate downward pressure. If you generate excessive smoke from the cutting oil you are either applying too much pressure or your bit is dull. Rags or chip brushes saturated with cutting oil should be disposed of in a fire can or outside in the dumpster. Never place oil saturated material in the interior garbage cans within the space! | - When drilling into metal use cutting oil and apply moderate downward pressure. If you generate excessive smoke from the cutting oil you are either applying too much pressure or your bit is dull. Rags or chip brushes saturated with cutting oil should be disposed of in a fire can or outside in the dumpster. Never place oil saturated material in the interior garbage cans within the space! | ||
| + | |||
| + | ===== Speeds ===== | ||
| + | |||
| + | RPMs can be determined easily by using this {{: | ||
tool/drill_press.1449930676.txt.gz · Last modified: 2016/04/24 07:32 (external edit)