Differences

This shows you the differences between two versions of the page.

--- tool:cloudray_laser_lenses [2023/12/28 08:17] – majicj
+++ tool:cloudray_laser_lenses [2023/12/28 08:21] (current) – majicj
@@ Line 120: / Line 120: @@
   - Inspect the laser lens by looking through the end of the tube. If the lens appears dirty then please alert the Laser Cutter Committee so that they may perform laser lens maintenance.  Do not use a dirty lens as this will cause dirt to be baked onto the lens and permanently damage it.
-  - Return the 4 inch (orange tape) or compound engraving lens (blue tape) to the storage box and ensure that the 2.5 inch standard(green tape) lens is left on the laser cutter for the next person.
+  - Ensure that the 2.5 inch standard(green tape) lens is left on the laser cutter for the next person. Return the 4 inch (orange tape) or compound engraving lens (blue tape) to the lens storage box.
 {{:tool:laser_cutter:lenses:lensinspection.jpeg?direct&400|}}