Differences

This shows you the differences between two versions of the page.

--- tool:3d-printers:anycubic_photon_mono [2024/03/06 06:26] – created phillip_ma
+++ tool:3d-printers:anycubic_photon_mono [2024/03/06 06:57] (current) – phillip_ma
@@ Line 1: / Line 1: @@
-====== Name of Tool ======
+====== AnyCubic Photon Mono ======
@@ Line 19: / Line 19: @@
 ===== Safety =====
-This should outline safety concerns and guidelines for the tool and it's operation.
+Nitrile Gloves are Mandatory
+Respirator and turning on Ventalation highly recommended.
 ===== Specifications =====
-Detailed specifications and references to information describing the tool. Strive for comprehensive!
+k printer
+===== Approved Resins =====
+Members are encouraged to bring their own resin for their printing.  Resin left behind is fair game for anyone to use and can easily be mixed in with resins of a different brand affecting the print quality of subsequent prints.
+^ Brand ^ Layer Thickness ^ Normal Exposure ^ Bottom Exposure time ^ Bottom Layers ^
+|Elegoo Plant Based 3D Printer Resin| 0.05mm | 1.5s | 80s | 6|
 ===== Tutorial =====
-Instructions on how to use the tool or links to references, pdf guide or something. This should be a solid basis for any required training.
+Contact @phillip_m or @avy on slack for training.  A form is also pinned to the #3dprinting channel in slack but contact us directly if you want the run down.
 ===== Maintenance Log ====
-Any maintenance, repairs, relocations, changes, etc to the tool should be logged below with a note, date and who!
 ^ Note               ^ Date         ^ Who       ^
-| Wiki entry created | Nov 20, 2013 | Thomas L. |
+| Routine Test print | March 5th, 2024 | Phillip M |