Differences

This shows you the differences between two versions of the page.

--- tutorials:custom_springs [2017/07/09 06:13] – rsim
+++ tutorials:custom_springs [2017/07/09 06:15] – rsim
@@ Line 1: / Line 1: @@
 You can make custom springs of any size on the lathe with music wire (piano/guitar strings)!
-D'Addario solid high carbon steel acoustic/electric guitar strings are available from [[http://tomleemusic.ca/|Tom Lee Music]] for $1 each (#16=0.4mm, #20=0.5mm, #24=0.6mm) and [[http://amazon.ca|Amazon]] for a bit more. There are a lot of strings, so look for "Plain Steel Guitar Single String", PL0xx where xx=07-26 (e.g. PL016 for #16/0.4mm).
+[[http://www.daddario.com/DADProductDetail.Page?ActiveID=3769&productid=46&productname=Plain_Steel_Singles|D'Addario solid high carbon steel acoustic/electric guitar strings]] are available from [[http://tomleemusic.ca/|Tom Lee Music]] for $1 each (#16=0.4mm, #20=0.5mm, #24=0.6mm) and [[http://amazon.ca|Amazon]] for a bit more. There are a lot of strings, so look for "Plain Steel Guitar Single String", PL0xx where xx=07-26 (e.g. PL016 for #16/0.4mm).
 For 0.8mm and up you're looking at piano strings, which are apparently hard to buy in Canada (you have to be a licensed piano tuner!). They can be purchased from AliExpress however, or from most hobby shops as 'music wire' - see the [[:suppliers|suppliers wiki page]] for links.